dan
/
EM7180_STM32
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Create Global.h

master
Kris Winer 9 years ago
parent
e24bcdd76e
commit
45beee8f85
1 changed files with 523 additions and 0 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 523
      WarmStartandAccelCal/Global.h

523
WarmStartandAccelCal/Global.h
Unescape View File

@ -0,0 +1,523 @@ @@ -0,0 +1,523 @@
#ifndef Globals_h
#define Globals_h
/*************************************************************************************************/
/************* ***************/
/************* Parameter Definitions ***************/
/************* ***************/
/*************************************************************************************************/
// These are the free parameters in the Mahony filter and fusion scheme, Kp for proportional feedback, Ki for integral
#define Kp 2.0f * 5.0f
#define Ki 0.0f
// BMP280 registers
#define BMP280_TEMP_XLSB 0xFC
#define BMP280_TEMP_LSB 0xFB
#define BMP280_TEMP_MSB 0xFA
#define BMP280_PRESS_XLSB 0xF9
#define BMP280_PRESS_LSB 0xF8
#define BMP280_PRESS_MSB 0xF7
#define BMP280_CONFIG 0xF5
#define BMP280_CTRL_MEAS 0xF4
#define BMP280_STATUS 0xF3
#define BMP280_RESET 0xE0
#define BMP280_ID 0xD0 // should be 0x58
#define BMP280_CALIB00 0x88
// See also MPU-9250 Register Map and Descriptions, Revision 4.0, RM-MPU-9250A-00, Rev. 1.4, 9/9/2013 for registers not listed in
// above document; the MPU9250 and MPU9150 are virtually identical but the latter has a different register map
//
//Magnetometer Registers
#define AK8963_ADDRESS 0x0C
#define WHO_AM_I_AK8963 0x00 // should return 0x48
#define INFO 0x01
#define AK8963_ST1 0x02 // data ready status bit 0
#define AK8963_XOUT_L 0x03 // data
#define AK8963_XOUT_H 0x04
#define AK8963_YOUT_L 0x05
#define AK8963_YOUT_H 0x06
#define AK8963_ZOUT_L 0x07
#define AK8963_ZOUT_H 0x08
#define AK8963_ST2 0x09 // Data overflow bit 3 and data read error status bit 2
#define AK8963_CNTL 0x0A // Power down (0000), single-measurement (0001), self-test (1000) and Fuse ROM (1111) modes on bits 3:0
#define AK8963_ASTC 0x0C // Self test control
#define AK8963_I2CDIS 0x0F // I2C disable
#define AK8963_ASAX 0x10 // Fuse ROM x-axis sensitivity adjustment value
#define AK8963_ASAY 0x11 // Fuse ROM y-axis sensitivity adjustment value
#define AK8963_ASAZ 0x12 // Fuse ROM z-axis sensitivity adjustment value
#define SELF_TEST_X_GYRO 0x00
#define SELF_TEST_Y_GYRO 0x01
#define SELF_TEST_Z_GYRO 0x02
/*#define X_FINE_GAIN 0x03 // [7:0] fine gain
#define Y_FINE_GAIN 0x04
#define Z_FINE_GAIN 0x05
#define XA_OFFSET_H 0x06 // User-defined trim values for accelerometer
#define XA_OFFSET_L_TC 0x07
#define YA_OFFSET_H 0x08
#define YA_OFFSET_L_TC 0x09
#define ZA_OFFSET_H 0x0A
#define ZA_OFFSET_L_TC 0x0B */
#define SELF_TEST_X_ACCEL 0x0D
#define SELF_TEST_Y_ACCEL 0x0E
#define SELF_TEST_Z_ACCEL 0x0F
#define SELF_TEST_A 0x10
#define XG_OFFSET_H 0x13 // User-defined trim values for gyroscope
#define XG_OFFSET_L 0x14
#define YG_OFFSET_H 0x15
#define YG_OFFSET_L 0x16
#define ZG_OFFSET_H 0x17
#define ZG_OFFSET_L 0x18
#define SMPLRT_DIV 0x19
#define CONFIG 0x1A
#define GYRO_CONFIG 0x1B
#define ACCEL_CONFIG 0x1C
#define ACCEL_CONFIG2 0x1D
#define LP_ACCEL_ODR 0x1E
#define WOM_THR 0x1F
#define MOT_DUR 0x20 // Duration counter threshold for motion interrupt generation, 1 kHz rate, LSB = 1 ms
#define ZMOT_THR 0x21 // Zero-motion detection threshold bits [7:0]
#define ZRMOT_DUR 0x22 // Duration counter threshold for zero motion interrupt generation, 16 Hz rate, LSB = 64 ms
#define FIFO_EN 0x23
#define I2C_MST_CTRL 0x24
#define I2C_SLV0_ADDR 0x25
#define I2C_SLV0_REG 0x26
#define I2C_SLV0_CTRL 0x27
#define I2C_SLV1_ADDR 0x28
#define I2C_SLV1_REG 0x29
#define I2C_SLV1_CTRL 0x2A
#define I2C_SLV2_ADDR 0x2B
#define I2C_SLV2_REG 0x2C
#define I2C_SLV2_CTRL 0x2D
#define I2C_SLV3_ADDR 0x2E
#define I2C_SLV3_REG 0x2F
#define I2C_SLV3_CTRL 0x30
#define I2C_SLV4_ADDR 0x31
#define I2C_SLV4_REG 0x32
#define I2C_SLV4_DO 0x33
#define I2C_SLV4_CTRL 0x34
#define I2C_SLV4_DI 0x35
#define I2C_MST_STATUS 0x36
#define INT_PIN_CFG 0x37
#define INT_ENABLE 0x38
#define DMP_INT_STATUS 0x39 // Check DMP interrupt
#define INT_STATUS 0x3A
#define ACCEL_XOUT_H 0x3B
#define ACCEL_XOUT_L 0x3C
#define ACCEL_YOUT_H 0x3D
#define ACCEL_YOUT_L 0x3E
#define ACCEL_ZOUT_H 0x3F
#define ACCEL_ZOUT_L 0x40
#define TEMP_OUT_H 0x41
#define TEMP_OUT_L 0x42
#define GYRO_XOUT_H 0x43
#define GYRO_XOUT_L 0x44
#define GYRO_YOUT_H 0x45
#define GYRO_YOUT_L 0x46
#define GYRO_ZOUT_H 0x47
#define GYRO_ZOUT_L 0x48
#define EXT_SENS_DATA_00 0x49
#define EXT_SENS_DATA_01 0x4A
#define EXT_SENS_DATA_02 0x4B
#define EXT_SENS_DATA_03 0x4C
#define EXT_SENS_DATA_04 0x4D
#define EXT_SENS_DATA_05 0x4E
#define EXT_SENS_DATA_06 0x4F
#define EXT_SENS_DATA_07 0x50
#define EXT_SENS_DATA_08 0x51
#define EXT_SENS_DATA_09 0x52
#define EXT_SENS_DATA_10 0x53
#define EXT_SENS_DATA_11 0x54
#define EXT_SENS_DATA_12 0x55
#define EXT_SENS_DATA_13 0x56
#define EXT_SENS_DATA_14 0x57
#define EXT_SENS_DATA_15 0x58
#define EXT_SENS_DATA_16 0x59
#define EXT_SENS_DATA_17 0x5A
#define EXT_SENS_DATA_18 0x5B
#define EXT_SENS_DATA_19 0x5C
#define EXT_SENS_DATA_20 0x5D
#define EXT_SENS_DATA_21 0x5E
#define EXT_SENS_DATA_22 0x5F
#define EXT_SENS_DATA_23 0x60
#define MOT_DETECT_STATUS 0x61
#define I2C_SLV0_DO 0x63
#define I2C_SLV1_DO 0x64
#define I2C_SLV2_DO 0x65
#define I2C_SLV3_DO 0x66
#define I2C_MST_DELAY_CTRL 0x67
#define SIGNAL_PATH_RESET 0x68
#define MOT_DETECT_CTRL 0x69
#define USER_CTRL 0x6A // Bit 7 enable DMP, bit 3 reset DMP
#define PWR_MGMT_1 0x6B // Device defaults to the SLEEP mode
#define PWR_MGMT_2 0x6C
#define DMP_BANK 0x6D // Activates a specific bank in the DMP
#define DMP_RW_PNT 0x6E // Set read/write pointer to a specific start address in specified DMP bank
#define DMP_REG 0x6F // Register in DMP from which to read or to which to write
#define DMP_REG_1 0x70
#define DMP_REG_2 0x71
#define FIFO_COUNTH 0x72
#define FIFO_COUNTL 0x73
#define FIFO_R_W 0x74
#define WHO_AM_I_MPU9250 0x75 // Should return 0x71
#define XA_OFFSET_H 0x77
#define XA_OFFSET_L 0x78
#define YA_OFFSET_H 0x7A
#define YA_OFFSET_L 0x7B
#define ZA_OFFSET_H 0x7D
#define ZA_OFFSET_L 0x7E
// EM7180 SENtral register map
// see http://www.emdeveloper.com/downloads/7180/EMSentral_EM7180_Register_Map_v1_3.pdf
//
#define EM7180_QX 0x00 // this is a 32-bit normalized floating point number read from registers 0x00-03
#define EM7180_QY 0x04 // this is a 32-bit normalized floating point number read from registers 0x04-07
#define EM7180_QZ 0x08 // this is a 32-bit normalized floating point number read from registers 0x08-0B
#define EM7180_QW 0x0C // this is a 32-bit normalized floating point number read from registers 0x0C-0F
#define EM7180_QTIME 0x10 // this is a 16-bit unsigned integer read from registers 0x10-11
#define EM7180_MX 0x12 // int16_t from registers 0x12-13
#define EM7180_MY 0x14 // int16_t from registers 0x14-15
#define EM7180_MZ 0x16 // int16_t from registers 0x16-17
#define EM7180_MTIME 0x18 // uint16_t from registers 0x18-19
#define EM7180_AX 0x1A // int16_t from registers 0x1A-1B
#define EM7180_AY 0x1C // int16_t from registers 0x1C-1D
#define EM7180_AZ 0x1E // int16_t from registers 0x1E-1F
#define EM7180_ATIME 0x20 // uint16_t from registers 0x20-21
#define EM7180_GX 0x22 // int16_t from registers 0x22-23
#define EM7180_GY 0x24 // int16_t from registers 0x24-25
#define EM7180_GZ 0x26 // int16_t from registers 0x26-27
#define EM7180_GTIME 0x28 // uint16_t from registers 0x28-29
#define EM7180_Baro 0x2A // start of two-byte MS5637 pressure data, 16-bit signed interger
#define EM7180_BaroTIME 0x2C // start of two-byte MS5637 pressure timestamp, 16-bit unsigned
#define EM7180_Temp 0x2E // start of two-byte MS5637 temperature data, 16-bit signed interger
#define EM7180_TempTIME 0x30 // start of two-byte MS5637 temperature timestamp, 16-bit unsigned
#define EM7180_QRateDivisor 0x32 // uint8_t
#define EM7180_EnableEvents 0x33
#define EM7180_HostControl 0x34
#define EM7180_EventStatus 0x35
#define EM7180_SensorStatus 0x36
#define EM7180_SentralStatus 0x37
#define EM7180_AlgorithmStatus 0x38
#define EM7180_FeatureFlags 0x39
#define EM7180_ParamAcknowledge 0x3A
#define EM7180_SavedParamByte0 0x3B
#define EM7180_SavedParamByte1 0x3C
#define EM7180_SavedParamByte2 0x3D
#define EM7180_SavedParamByte3 0x3E
#define EM7180_ActualMagRate 0x45
#define EM7180_ActualAccelRate 0x46
#define EM7180_ActualGyroRate 0x47
#define EM7180_ActualBaroRate 0x48
#define EM7180_ActualTempRate 0x49
#define EM7180_ErrorRegister 0x50
#define EM7180_AlgorithmControl 0x54
#define EM7180_MagRate 0x55
#define EM7180_AccelRate 0x56
#define EM7180_GyroRate 0x57
#define EM7180_BaroRate 0x58
#define EM7180_TempRate 0x59
#define EM7180_LoadParamByte0 0x60
#define EM7180_LoadParamByte1 0x61
#define EM7180_LoadParamByte2 0x62
#define EM7180_LoadParamByte3 0x63
#define EM7180_ParamRequest 0x64
#define EM7180_ROMVersion1 0x70
#define EM7180_ROMVersion2 0x71
#define EM7180_RAMVersion1 0x72
#define EM7180_RAMVersion2 0x73
#define EM7180_ProductID 0x90
#define EM7180_RevisionID 0x91
#define EM7180_RunStatus 0x92
#define EM7180_UploadAddress 0x94 // uint16_t registers 0x94 (MSB)-5(LSB)
#define EM7180_UploadData 0x96
#define EM7180_CRCHost 0x97 // uint32_t from registers 0x97-9A
#define EM7180_ResetRequest 0x9B
#define EM7180_PassThruStatus 0x9E
#define EM7180_PassThruControl 0xA0
#define EM7180_ACC_LPF_BW 0x5B //Register GP36
#define EM7180_GYRO_LPF_BW 0x5C //Register GP37
#define EM7180_BARO_LPF_BW 0x5D //Register GP38
#define EM7180_GP36 0x5B
#define EM7180_GP37 0x5C
#define EM7180_GP38 0x5D
#define EM7180_GP39 0x5E
#define EM7180_GP40 0x5F
#define EM7180_GP50 0x69
#define EM7180_GP51 0x6A
#define EM7180_GP52 0x6B
#define EM7180_GP53 0x6C
#define EM7180_GP54 0x6D
#define EM7180_GP55 0x6E
#define EM7180_GP56 0x6F
#define EM7180_ADDRESS 0x28 // Address of the EM7180 SENtral sensor hub
#define M24512DFM_DATA_ADDRESS 0x50 // Address of the 500 page M24512DRC EEPROM data buffer, 1024 bits (128 8-bit bytes) per page
#define M24512DFM_IDPAGE_ADDRESS 0x58 // Address of the single M24512DRC lockable EEPROM ID page
#define MPU9250_ADDRESS 0x68 // Device address of MPU9250 when ADO = 0
#define AK8963_ADDRESS 0x0C // Address of magnetometer
#define BMP280_ADDRESS 0x76 // Address of BMP280 altimeter when ADO = 0
/*************************************************************************************************/
/************* ***************/
/************* Enumerators and Structure Variables ***************/
/************* ***************/
/*************************************************************************************************/
// Set initial input parameters
enum Ascale {
AFS_2G = 0,
AFS_4G,
AFS_8G,
AFS_16G
};
enum Gscale {
GFS_250DPS = 0,
GFS_500DPS,
GFS_1000DPS,
GFS_2000DPS
};
enum Mscale {
MFS_14BITS = 0, // 0.6 mG per LSB
MFS_16BITS // 0.15 mG per LSB
};
enum Posr {
P_OSR_00 = 0, // no op
P_OSR_01,
P_OSR_02,
P_OSR_04,
P_OSR_08,
P_OSR_16
};
enum Tosr {
T_OSR_00 = 0, // no op
T_OSR_01,
T_OSR_02,
T_OSR_04,
T_OSR_08,
T_OSR_16
};
enum IIRFilter {
full = 0, // bandwidth at full sample rate
BW0_223ODR,
BW0_092ODR,
BW0_042ODR,
BW0_021ODR // bandwidth at 0.021 x sample rate
};
enum Mode {
BMP280Sleep = 0,
forced,
forced2,
normal
};
enum SBy {
t_00_5ms = 0,
t_62_5ms,
t_125ms,
t_250ms,
t_500ms,
t_1000ms,
t_2000ms,
t_4000ms,
};
struct acc_cal
{
int16_t accZero_max[3];
int16_t accZero_min[3];
};
struct Sentral_WS_params
{
uint8_t Sen_param[35][4];
};
/*************************************************************************************************/
/************* ***************/
/************* Global Scope Variables ***************/
/************* ***************/
/*************************************************************************************************/
// General purpose variables
int16_t serial_input;
static int16_t warm_start = 0;
static int16_t accel_cal = 0;
static int16_t warm_start_saved = 0;
static int16_t accel_cal_saved = 0;
static uint16_t calibratingA = 0;
// Specify BMP280 configuration
uint8_t Posr = P_OSR_16;
uint8_t Tosr = T_OSR_02;
uint8_t Mode = normal;
uint8_t IIRFilter = BW0_042ODR;
uint8_t SBy = t_62_5ms;
// t_fine carries fine temperature as global value for BMP280
int32_t t_fine;
// Specify sensor full scale
uint8_t Gscale = GFS_250DPS;
uint8_t Ascale = AFS_2G;
// Choose either 14-bit or 16-bit magnetometer resolution
uint8_t Mscale = MFS_16BITS;
// 2 for 8 Hz, 6 for 100 Hz continuous magnetometer data read
uint8_t Mmode = 0x02;
// scale resolutions per LSB for the sensors
float aRes;
float gRes;
float mRes;
// Pin definitions
// These can be changed, 2 and 3 are the Arduinos ext int pins
int intPin = 8;
// LED on the Teensy 3.1
int myLed = 13;
// BMP280 compensation parameters
uint16_t dig_T1;
uint16_t dig_P1;
int16_t dig_T2;
int16_t dig_T3;
int16_t dig_P2;
int16_t dig_P3;
int16_t dig_P4;
int16_t dig_P5;
int16_t dig_P6;
int16_t dig_P7;
int16_t dig_P8;
int16_t dig_P9;
// stores BMP280 pressures sensor pressure and temperature
double Temperature;
double Pressure;
// pressure and temperature raw count output for BMP280
int32_t rawPress;
int32_t rawTemp;
// MPU9250 variables
// Stores the 16-bit signed accelerometer sensor output
int16_t accelCount[3];
// Stores the 16-bit signed gyro sensor output
int16_t gyroCount[3];
// Stores the 16-bit signed magnetometer sensor output
int16_t magCount[3];
// quaternion data register
float Quat[4] = {0, 0, 0, 0};
// Factory mag calibration and mag bias
float magCalibration[3] = {0, 0, 0};
// Bias corrections for gyro, accelerometer, mag
float gyroBias[3] = {0, 0, 0};
float accelBias[3] = {0, 0, 0};
float magBias[3] = {0, 0, 0};
float magScale[3] = {0, 0, 0};
// Pressure, temperature raw count output
int16_t tempCount;
int16_t rawPressure;
int16_t rawTemperature;
// Stores the MPU9250 internal chip temperature in degrees Celsius
float temperature;
float pressure;
float altitude;
// holds results of gyro and accelerometer self test
float SelfTest[6];
// Global constants for 9 DoF fusion and AHRS (Attitude and Heading Reference System)
// Gyroscope measurement error in rads/s (start at 40 deg/s)
float GyroMeasError = PI * (40.0f / 180.0f);
// Gyroscope measurement drift in rad/s/s (start at 0.0 deg/s/s)
float GyroMeasDrift = PI * (0.0f / 180.0f);
// There is a tradeoff in the beta parameter between accuracy and response speed.
// In the original Madgwick study, beta of 0.041 (corresponding to GyroMeasError of 2.7 degrees/s) was found to give optimal accuracy.
// However, with this value, the LSM9SD0 response time is about 10 seconds to a stable initial quaternion.
// Subsequent changes also require a longish lag time to a stable output, not fast enough for a quadcopter or robot car!
// By increasing beta (GyroMeasError) by about a factor of fifteen, the response time constant is reduced to ~2 sec
// I haven't noticed any reduction in solution accuracy. This is essentially the I coefficient in a PID control sense;
// the bigger the feedback coefficient, the faster the solution converges, usually at the expense of accuracy.
// In any case, this is the free parameter in the Madgwick filtering and fusion scheme.
// Compute beta
float beta = sqrt(3.0f / 4.0f) * GyroMeasError;
// Compute zeta, the other free parameter in the Madgwick scheme usually set to a small or zero value
float zeta = sqrt(3.0f / 4.0f) * GyroMeasDrift;
// Used to control display output rate
uint32_t delt_t = 0;
uint32_t count = 0;
uint32_t sumCount = 0;
float pitch;
float yaw;
float roll;
float Yaw;
float Pitch;
float Roll;
// Integration interval for both filter schemes
float deltat = 0.0f;
float sum = 0.0f;
// used to calculate integration interval
uint32_t lastUpdate = 0;
uint32_t firstUpdate = 0;
// used to calculate integration interval
uint32_t Now = 0;
// used for param transfer
uint8_t param[4];
// EM7180 sensor full scale ranges
uint16_t EM7180_mag_fs;
uint16_t EM7180_acc_fs;
uint16_t EM7180_gyro_fs;
// variables to hold latest sensor data values
float ax;
float ay;
float az;
float gx;
float gy;
float gz;
float mx;
float my;
float mz;
// Vector to hold quaternion
float q[4] = {1.0f, 0.0f, 0.0f, 0.0f};
// Vector to hold integral error for Mahony method
float eInt[3] = {0.0f, 0.0f, 0.0f};
acc_cal global_conf;
Sentral_WS_params WS_params;
#endif // Globals_h
Write Preview
Loading…
Cancel
Save