|
|
|
|
@ -3,54 +3,91 @@ LimeSdrInputSettings:
@@ -3,54 +3,91 @@ LimeSdrInputSettings:
|
|
|
|
|
properties: |
|
|
|
|
title: |
|
|
|
|
type: string |
|
|
|
|
description: "User-visible title." |
|
|
|
|
centerFrequency: |
|
|
|
|
type: integer |
|
|
|
|
format: int64 |
|
|
|
|
description: "Device center frequency in Hz." |
|
|
|
|
devSampleRate: |
|
|
|
|
type: integer |
|
|
|
|
description: "Device I/Q sample rate in samples per second before software decimation or interpolation." |
|
|
|
|
log2HardDecim: |
|
|
|
|
type: integer |
|
|
|
|
description: "Base-2 exponent of the hardware decimation factor." |
|
|
|
|
dcBlock: |
|
|
|
|
type: integer |
|
|
|
|
description: "Enable DSP DC-offset correction (1 enabled, 0 disabled)." |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
splitFreq: |
|
|
|
|
type: integer |
|
|
|
|
description: "Split freq setting for Lime sdr input." |
|
|
|
|
iqCorrection: |
|
|
|
|
type: integer |
|
|
|
|
description: "Enable I/Q imbalance correction (1 enabled, 0 disabled)." |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
log2SoftDecim: |
|
|
|
|
type: integer |
|
|
|
|
description: "Base-2 exponent of the software decimation factor." |
|
|
|
|
lpfBW: |
|
|
|
|
type: integer |
|
|
|
|
description: "Analog low-pass filter bandwidth in Hz." |
|
|
|
|
lpfFIREnable: |
|
|
|
|
type: integer |
|
|
|
|
description: "Enable the digital FIR low-pass filter (1 enabled, 0 disabled)." |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
lpfFIRBW: |
|
|
|
|
type: integer |
|
|
|
|
description: "Digital FIR low-pass filter bandwidth in Hz." |
|
|
|
|
gain: |
|
|
|
|
type: integer |
|
|
|
|
description: "Gain setting; units and available values depend on the device or plugin." |
|
|
|
|
ncoEnable: |
|
|
|
|
type: integer |
|
|
|
|
description: "Enable the numerically controlled oscillator (1 enabled, 0 disabled)." |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
ncoFrequency: |
|
|
|
|
type: integer |
|
|
|
|
description: "Numerically controlled oscillator frequency in Hz." |
|
|
|
|
antennaPath: |
|
|
|
|
type: integer |
|
|
|
|
description: "Selected RF antenna path." |
|
|
|
|
gainMode: |
|
|
|
|
type: integer |
|
|
|
|
description: "Gain-control mode selection." |
|
|
|
|
lnaGain: |
|
|
|
|
type: integer |
|
|
|
|
description: "Low-noise-amplifier gain setting." |
|
|
|
|
tiaGain: |
|
|
|
|
type: integer |
|
|
|
|
description: "TIA gain setting for Lime sdr input." |
|
|
|
|
pgaGain: |
|
|
|
|
type: integer |
|
|
|
|
description: "PGA gain setting for Lime sdr input." |
|
|
|
|
extClock: |
|
|
|
|
type: integer |
|
|
|
|
description: "Use an external reference clock (1 enabled, 0 disabled)." |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
extClockFreq: |
|
|
|
|
type: integer |
|
|
|
|
description: "External reference-clock frequency in Hz." |
|
|
|
|
transverterMode: |
|
|
|
|
type: integer |
|
|
|
|
description: "Enable transverter frequency translation (1 enabled, 0 disabled)." |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
transverterDeltaFrequency: |
|
|
|
|
type: integer |
|
|
|
|
format: int64 |
|
|
|
|
description: "Frequency translation applied in transverter mode in Hz." |
|
|
|
|
iqOrder: |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
description: > |
|
|
|
|
IQ samples order |
|
|
|
|
* 0 - Q then I (swapped) |
|
|
|
|
@ -58,71 +95,113 @@ LimeSdrInputSettings:
@@ -58,71 +95,113 @@ LimeSdrInputSettings:
|
|
|
|
|
gpioDir: |
|
|
|
|
type: integer |
|
|
|
|
format: int8 |
|
|
|
|
description: "GPIO direction bit mask, with one bit per pin." |
|
|
|
|
gpioPins: |
|
|
|
|
type: integer |
|
|
|
|
format: int8 |
|
|
|
|
description: "GPIO pin-state bit mask, with one bit per pin." |
|
|
|
|
useReverseAPI: |
|
|
|
|
description: Synchronize with reverse API (1 for yes, 0 for no) |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
reverseAPIAddress: |
|
|
|
|
type: string |
|
|
|
|
description: "IPv4 address or host name of the reverse API peer." |
|
|
|
|
reverseAPIPort: |
|
|
|
|
type: integer |
|
|
|
|
description: "TCP port of the reverse API peer." |
|
|
|
|
minimum: 1 |
|
|
|
|
maximum: 65535 |
|
|
|
|
reverseAPIDeviceIndex: |
|
|
|
|
type: integer |
|
|
|
|
description: "Device-set index used by the reverse API peer." |
|
|
|
|
|
|
|
|
|
LimeSdrOutputSettings: |
|
|
|
|
description: LimeSDR |
|
|
|
|
properties: |
|
|
|
|
title: |
|
|
|
|
type: string |
|
|
|
|
description: "User-visible title." |
|
|
|
|
centerFrequency: |
|
|
|
|
type: integer |
|
|
|
|
format: int64 |
|
|
|
|
description: "Device center frequency in Hz." |
|
|
|
|
devSampleRate: |
|
|
|
|
type: integer |
|
|
|
|
description: "Device I/Q sample rate in samples per second before software decimation or interpolation." |
|
|
|
|
log2HardInterp: |
|
|
|
|
type: integer |
|
|
|
|
description: "Base-2 exponent of the hardware interpolation factor." |
|
|
|
|
log2SoftInterp: |
|
|
|
|
type: integer |
|
|
|
|
description: "Base-2 exponent of the software interpolation factor." |
|
|
|
|
lpfBW: |
|
|
|
|
type: integer |
|
|
|
|
description: "Analog low-pass filter bandwidth in Hz." |
|
|
|
|
lpfFIREnable: |
|
|
|
|
type: integer |
|
|
|
|
description: "Enable the digital FIR low-pass filter (1 enabled, 0 disabled)." |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
lpfFIRBW: |
|
|
|
|
type: integer |
|
|
|
|
description: "Digital FIR low-pass filter bandwidth in Hz." |
|
|
|
|
gain: |
|
|
|
|
type: integer |
|
|
|
|
description: "Gain setting; units and available values depend on the device or plugin." |
|
|
|
|
ncoEnable: |
|
|
|
|
type: integer |
|
|
|
|
description: "Enable the numerically controlled oscillator (1 enabled, 0 disabled)." |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
ncoFrequency: |
|
|
|
|
type: integer |
|
|
|
|
description: "Numerically controlled oscillator frequency in Hz." |
|
|
|
|
antennaPath: |
|
|
|
|
type: integer |
|
|
|
|
description: "Selected RF antenna path." |
|
|
|
|
extClock: |
|
|
|
|
type: integer |
|
|
|
|
description: "Use an external reference clock (1 enabled, 0 disabled)." |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
extClockFreq: |
|
|
|
|
type: integer |
|
|
|
|
description: "External reference-clock frequency in Hz." |
|
|
|
|
transverterMode: |
|
|
|
|
type: integer |
|
|
|
|
description: "Enable transverter frequency translation (1 enabled, 0 disabled)." |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
transverterDeltaFrequency: |
|
|
|
|
type: integer |
|
|
|
|
format: int64 |
|
|
|
|
description: "Frequency translation applied in transverter mode in Hz." |
|
|
|
|
gpioDir: |
|
|
|
|
type: integer |
|
|
|
|
format: int8 |
|
|
|
|
description: "GPIO direction bit mask, with one bit per pin." |
|
|
|
|
gpioPins: |
|
|
|
|
type: integer |
|
|
|
|
format: int8 |
|
|
|
|
description: "GPIO pin-state bit mask, with one bit per pin." |
|
|
|
|
useReverseAPI: |
|
|
|
|
description: Synchronize with reverse API (1 for yes, 0 for no) |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
reverseAPIAddress: |
|
|
|
|
type: string |
|
|
|
|
description: "IPv4 address or host name of the reverse API peer." |
|
|
|
|
reverseAPIPort: |
|
|
|
|
type: integer |
|
|
|
|
description: "TCP port of the reverse API peer." |
|
|
|
|
minimum: 1 |
|
|
|
|
maximum: 65535 |
|
|
|
|
reverseAPIDeviceIndex: |
|
|
|
|
type: integer |
|
|
|
|
description: "Device-set index used by the reverse API peer." |
|
|
|
|
|
|
|
|
|
LimeSdrMIMOSettings: |
|
|
|
|
description: LimeSDR |
|
|
|
|
@ -130,8 +209,10 @@ LimeSdrMIMOSettings:
@@ -130,8 +209,10 @@ LimeSdrMIMOSettings:
|
|
|
|
|
# General |
|
|
|
|
title: |
|
|
|
|
type: string |
|
|
|
|
description: "User-visible title." |
|
|
|
|
devSampleRate: |
|
|
|
|
type: integer |
|
|
|
|
description: "Device I/Q sample rate in samples per second before software decimation or interpolation." |
|
|
|
|
gpioDir: |
|
|
|
|
description: GPIO pin direction LSB first; 0 input, 1 output |
|
|
|
|
type: integer |
|
|
|
|
@ -143,40 +224,61 @@ LimeSdrMIMOSettings:
@@ -143,40 +224,61 @@ LimeSdrMIMOSettings:
|
|
|
|
|
extClock: |
|
|
|
|
description: Boolean 1 if external clock source else 0 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
extClockFreq: |
|
|
|
|
description: Frequency (Hz) of external clock source |
|
|
|
|
type: integer |
|
|
|
|
useReverseAPI: |
|
|
|
|
description: Boolean |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
reverseAPIAddress: |
|
|
|
|
type: string |
|
|
|
|
description: "IPv4 address or host name of the reverse API peer." |
|
|
|
|
reverseAPIPort: |
|
|
|
|
type: integer |
|
|
|
|
description: "TCP port of the reverse API peer." |
|
|
|
|
minimum: 1 |
|
|
|
|
maximum: 65535 |
|
|
|
|
reverseAPIDeviceIndex: |
|
|
|
|
type: integer |
|
|
|
|
description: "Device-set index used by the reverse API peer." |
|
|
|
|
# Rx general |
|
|
|
|
rxCenterFrequency: |
|
|
|
|
type: integer |
|
|
|
|
format: int64 |
|
|
|
|
description: "Receive center frequency in Hz." |
|
|
|
|
log2HardDecim: |
|
|
|
|
type: integer |
|
|
|
|
description: "Base-2 exponent of the hardware decimation factor." |
|
|
|
|
log2SoftDecim: |
|
|
|
|
type: integer |
|
|
|
|
description: "Base-2 exponent of the software decimation factor." |
|
|
|
|
dcBlock: |
|
|
|
|
description: Boolean |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
iqCorrection: |
|
|
|
|
description: Boolean |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
rxTransverterMode: |
|
|
|
|
description: Boolean |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
rxTransverterDeltaFrequency: |
|
|
|
|
type: integer |
|
|
|
|
format: int64 |
|
|
|
|
description: "Receive frequency translation applied in transverter mode in Hz." |
|
|
|
|
iqOrder: |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
description: > |
|
|
|
|
IQ samples order |
|
|
|
|
* 0 - Q then I (swapped) |
|
|
|
|
@ -184,6 +286,8 @@ LimeSdrMIMOSettings:
@@ -184,6 +286,8 @@ LimeSdrMIMOSettings:
|
|
|
|
|
ncoEnableRx: |
|
|
|
|
description: Boolean 1 to enable TSP NCO and mixing else 0 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
ncoFrequencyRx: |
|
|
|
|
description: Rx Actual NCO frequency (the resulting frequency with mixing is displayed) |
|
|
|
|
type: integer |
|
|
|
|
@ -195,6 +299,8 @@ LimeSdrMIMOSettings:
@@ -195,6 +299,8 @@ LimeSdrMIMOSettings:
|
|
|
|
|
lpfFIREnableRx0: |
|
|
|
|
description: Boolean 1 to enable Rx[0] LMS digital lowpass FIR filters else 0 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
lpfFIRBWRx0: |
|
|
|
|
description: Rx[0] LMS digital lowpass FIR filters bandwidth (Hz) |
|
|
|
|
type: number |
|
|
|
|
@ -213,12 +319,16 @@ LimeSdrMIMOSettings:
@@ -213,12 +319,16 @@ LimeSdrMIMOSettings:
|
|
|
|
|
* 4 - LB TX1 |
|
|
|
|
* 5 - LB TX2 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 5 |
|
|
|
|
gainModeRx0: |
|
|
|
|
description: > |
|
|
|
|
Rx[0] Gain mode: |
|
|
|
|
* 0 - auto |
|
|
|
|
* 1 - manual |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
lnaGainRx0: |
|
|
|
|
description: Rx[0] Manual LNA gain |
|
|
|
|
type: integer |
|
|
|
|
@ -236,6 +346,8 @@ LimeSdrMIMOSettings:
@@ -236,6 +346,8 @@ LimeSdrMIMOSettings:
|
|
|
|
|
lpfFIREnableRx1: |
|
|
|
|
description: Boolean 1 to enable Rx[1] LMS digital lowpass FIR filters else 0 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
lpfFIRBWRx1: |
|
|
|
|
description: Rx[1] LMS digital lowpass FIR filters bandwidth (Hz) |
|
|
|
|
type: number |
|
|
|
|
@ -253,12 +365,16 @@ LimeSdrMIMOSettings:
@@ -253,12 +365,16 @@ LimeSdrMIMOSettings:
|
|
|
|
|
* 4 - LB TX1 |
|
|
|
|
* 5 - LB TX2 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 5 |
|
|
|
|
gainModeRx1: |
|
|
|
|
description: > |
|
|
|
|
Rx[1] Gain mode: |
|
|
|
|
* 0 - auto |
|
|
|
|
* 1 - manual |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
lnaGainRx1: |
|
|
|
|
description: Rx[1] Manual LNA gain |
|
|
|
|
type: integer |
|
|
|
|
@ -272,19 +388,27 @@ LimeSdrMIMOSettings:
@@ -272,19 +388,27 @@ LimeSdrMIMOSettings:
|
|
|
|
|
txCenterFrequency: |
|
|
|
|
type: integer |
|
|
|
|
format: int64 |
|
|
|
|
description: "Transmit center frequency in Hz." |
|
|
|
|
log2HardInterp: |
|
|
|
|
type: integer |
|
|
|
|
description: "Base-2 exponent of the hardware interpolation factor." |
|
|
|
|
log2SoftInterp: |
|
|
|
|
type: integer |
|
|
|
|
description: "Base-2 exponent of the software interpolation factor." |
|
|
|
|
txTransverterMode: |
|
|
|
|
description: Boolean |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
txTransverterDeltaFrequency: |
|
|
|
|
type: integer |
|
|
|
|
format: int64 |
|
|
|
|
description: "Transmit frequency translation applied in transverter mode in Hz." |
|
|
|
|
ncoEnableTx: |
|
|
|
|
description: Boolean 1 to enable TSP NCO and mixing else 0 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
ncoFrequencyTx: |
|
|
|
|
description: Tx Actual NCO frequency (the resulting frequency with mixing is displayed) |
|
|
|
|
type: integer |
|
|
|
|
@ -296,6 +420,8 @@ LimeSdrMIMOSettings:
@@ -296,6 +420,8 @@ LimeSdrMIMOSettings:
|
|
|
|
|
lpfFIREnableTx0: |
|
|
|
|
description: Boolean 1 to enable Tx[0] LMS digital lowpass FIR filters else 0 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
lpfFIRBWTx0: |
|
|
|
|
description: Tx[0] LMS digital lowpass FIR filters bandwidth (Hz) |
|
|
|
|
type: number |
|
|
|
|
@ -310,6 +436,8 @@ LimeSdrMIMOSettings:
@@ -310,6 +436,8 @@ LimeSdrMIMOSettings:
|
|
|
|
|
* 1 - RF connector 1 |
|
|
|
|
* 2 - RF connector 2 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 2 |
|
|
|
|
# Tx channel 1 |
|
|
|
|
lpfBWTx1: |
|
|
|
|
description: Tx[1] LMS analog lowpass filter bandwidth (Hz) |
|
|
|
|
@ -318,6 +446,8 @@ LimeSdrMIMOSettings:
@@ -318,6 +446,8 @@ LimeSdrMIMOSettings:
|
|
|
|
|
lpfFIREnableTx1: |
|
|
|
|
description: Boolean 1 to enable Tx[1] LMS digital lowpass FIR filters else 0 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
lpfFIRBWTx1: |
|
|
|
|
description: Tx[1] LMS digital lowpass FIR filters bandwidth (Hz) |
|
|
|
|
type: number |
|
|
|
|
@ -332,6 +462,8 @@ LimeSdrMIMOSettings:
@@ -332,6 +462,8 @@ LimeSdrMIMOSettings:
|
|
|
|
|
* 1 - RF connector 1 |
|
|
|
|
* 2 - RF connector 2 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 2 |
|
|
|
|
|
|
|
|
|
LimeSdrInputReport: |
|
|
|
|
description: LimeSDR |
|
|
|
|
@ -342,19 +474,27 @@ LimeSdrInputReport:
@@ -342,19 +474,27 @@ LimeSdrInputReport:
|
|
|
|
|
streamActive: |
|
|
|
|
description: 1 if active else 0 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
fifoSize: |
|
|
|
|
type: integer |
|
|
|
|
description: "FIFO capacity in samples." |
|
|
|
|
fifoFill: |
|
|
|
|
type: integer |
|
|
|
|
description: "Current FIFO fill level." |
|
|
|
|
underrunCount: |
|
|
|
|
type: integer |
|
|
|
|
description: "Number of stream underrun events." |
|
|
|
|
overrunCount: |
|
|
|
|
type: integer |
|
|
|
|
description: "Number of stream overrun events." |
|
|
|
|
droppedPacketsCount: |
|
|
|
|
type: integer |
|
|
|
|
description: "Number of dropped packets." |
|
|
|
|
linkRate: |
|
|
|
|
type: number |
|
|
|
|
format: float |
|
|
|
|
description: "Measured streaming link rate." |
|
|
|
|
hwTimestamp: |
|
|
|
|
description: Hardware timestamp |
|
|
|
|
type: integer |
|
|
|
|
@ -362,12 +502,15 @@ LimeSdrInputReport:
@@ -362,12 +502,15 @@ LimeSdrInputReport:
|
|
|
|
|
temperature: |
|
|
|
|
type: number |
|
|
|
|
format: float |
|
|
|
|
description: "Reported device temperature." |
|
|
|
|
gpioDir: |
|
|
|
|
type: integer |
|
|
|
|
format: int8 |
|
|
|
|
description: "GPIO direction bit mask, with one bit per pin." |
|
|
|
|
gpioPins: |
|
|
|
|
type: integer |
|
|
|
|
format: int8 |
|
|
|
|
description: "GPIO pin-state bit mask, with one bit per pin." |
|
|
|
|
|
|
|
|
|
LimeSdrOutputReport: |
|
|
|
|
description: LimeSDR |
|
|
|
|
@ -378,19 +521,27 @@ LimeSdrOutputReport:
@@ -378,19 +521,27 @@ LimeSdrOutputReport:
|
|
|
|
|
streamActive: |
|
|
|
|
description: 1 if active else 0 |
|
|
|
|
type: integer |
|
|
|
|
minimum: 0 |
|
|
|
|
maximum: 1 |
|
|
|
|
fifoSize: |
|
|
|
|
type: integer |
|
|
|
|
description: "FIFO capacity in samples." |
|
|
|
|
fifoFill: |
|
|
|
|
type: integer |
|
|
|
|
description: "Current FIFO fill level." |
|
|
|
|
underrunCount: |
|
|
|
|
type: integer |
|
|
|
|
description: "Number of stream underrun events." |
|
|
|
|
overrunCount: |
|
|
|
|
type: integer |
|
|
|
|
description: "Number of stream overrun events." |
|
|
|
|
droppedPacketsCount: |
|
|
|
|
type: integer |
|
|
|
|
description: "Number of dropped packets." |
|
|
|
|
linkRate: |
|
|
|
|
type: number |
|
|
|
|
format: float |
|
|
|
|
description: "Measured streaming link rate." |
|
|
|
|
hwTimestamp: |
|
|
|
|
description: Hardware timestamp |
|
|
|
|
type: integer |
|
|
|
|
@ -398,12 +549,15 @@ LimeSdrOutputReport:
@@ -398,12 +549,15 @@ LimeSdrOutputReport:
|
|
|
|
|
temperature: |
|
|
|
|
type: number |
|
|
|
|
format: float |
|
|
|
|
description: "Reported device temperature." |
|
|
|
|
gpioDir: |
|
|
|
|
type: integer |
|
|
|
|
format: int8 |
|
|
|
|
description: "GPIO direction bit mask, with one bit per pin." |
|
|
|
|
gpioPins: |
|
|
|
|
type: integer |
|
|
|
|
format: int8 |
|
|
|
|
description: "GPIO pin-state bit mask, with one bit per pin." |
|
|
|
|
|
|
|
|
|
LimeSdrMIMOReport: |
|
|
|
|
description: LimeSDR |
|
|
|
|
@ -415,12 +569,15 @@ LimeSdrMIMOReport:
@@ -415,12 +569,15 @@ LimeSdrMIMOReport:
|
|
|
|
|
temperature: |
|
|
|
|
type: number |
|
|
|
|
format: float |
|
|
|
|
description: "Reported device temperature." |
|
|
|
|
gpioDir: |
|
|
|
|
type: integer |
|
|
|
|
format: int8 |
|
|
|
|
description: "GPIO direction bit mask, with one bit per pin." |
|
|
|
|
gpioPins: |
|
|
|
|
type: integer |
|
|
|
|
format: int8 |
|
|
|
|
description: "GPIO pin-state bit mask, with one bit per pin." |
|
|
|
|
successRx: |
|
|
|
|
description: 1 if Rx info was successfully retrieved else 0 |
|
|
|
|
type: integer |
|
|
|
|
@ -429,17 +586,23 @@ LimeSdrMIMOReport:
@@ -429,17 +586,23 @@ LimeSdrMIMOReport:
|
|
|
|
|
type: integer |
|
|
|
|
fifoSizeRx: |
|
|
|
|
type: integer |
|
|
|
|
description: "Reported fifo size receive." |
|
|
|
|
fifoFillRx: |
|
|
|
|
type: integer |
|
|
|
|
description: "Current receive FIFO fill level." |
|
|
|
|
underrunCountRx: |
|
|
|
|
type: integer |
|
|
|
|
description: "Reported underrun count receive." |
|
|
|
|
overrunCountRx: |
|
|
|
|
type: integer |
|
|
|
|
description: "Reported overrun count receive." |
|
|
|
|
droppedPacketsCountRx: |
|
|
|
|
type: integer |
|
|
|
|
description: "Reported dropped packets count receive." |
|
|
|
|
linkRateRx: |
|
|
|
|
type: number |
|
|
|
|
format: float |
|
|
|
|
description: "Reported link rate receive." |
|
|
|
|
successTx: |
|
|
|
|
description: 1 if Tx info was successfully retrieved else 0 |
|
|
|
|
type: integer |
|
|
|
|
@ -448,14 +611,20 @@ LimeSdrMIMOReport:
@@ -448,14 +611,20 @@ LimeSdrMIMOReport:
|
|
|
|
|
type: integer |
|
|
|
|
fifoSizeTx: |
|
|
|
|
type: integer |
|
|
|
|
description: "Reported fifo size transmit." |
|
|
|
|
fifoFillTx: |
|
|
|
|
type: integer |
|
|
|
|
description: "Current transmit FIFO fill level." |
|
|
|
|
underrunCountTx: |
|
|
|
|
type: integer |
|
|
|
|
description: "Reported underrun count transmit." |
|
|
|
|
overrunCountTx: |
|
|
|
|
type: integer |
|
|
|
|
description: "Reported overrun count transmit." |
|
|
|
|
droppedPacketsCountTx: |
|
|
|
|
type: integer |
|
|
|
|
description: "Reported dropped packets count transmit." |
|
|
|
|
linkRateTx: |
|
|
|
|
type: number |
|
|
|
|
format: float |
|
|
|
|
description: "Reported link rate transmit." |
|
|
|
|
|