@ -113,26 +113,44 @@ Use this button to toggle audio compression on or off.
@@ -113,26 +113,44 @@ Use this button to toggle audio compression on or off.
<h3>13: Input source control</h3>


<h4>13.1: Tone input select</h4>
<h4>13.1: Audio compressor</h4>
Activate/deactivate it for file and audio input only.
<h4>13.2: Audio compressor input gain</h4>
Gain in dB before compression
<h4>13.3: Audio compressor threshold</h4>
Threshold in dB above which compression applies a.k.a. "knee" point. The lower the value the harder is the compression and consequently higher the distorsion.
<h4>13.4: Tone input select</h4>
Switches to the tone input. You must switch it off to make other inputs available.
<h4>13.2: Morse keyer input select</h4>
<h4>13.5: Morse keyer input select</h4>
Switches to the Morse keyer input. You must switch it off to make other inputs available.
<h4>13.3: Tone frequency (kHz)</h4>
<h4>13.6: Tone frequency (kHz)</h4>
Adjusts the tone frequency from 0.1 to 2.5 kHz in 0.01 kHz steps
<h4>13.4: Audio input select and select audio input device</h4>
<h4>13.7: Audio input select and select audio input device</h4>
Left click to switch to the audio input. You must switch it off to make other inputs available.
Right click to select audio input device. See [audio management documentation](../../../sdrgui/audio.md) for details.
<h4>13.8: Audio feedback</h4>
Left click to activate audio feedback.
Right click to select audio output device for audio feedback. See [audio management documentation](../../../sdrgui/audio.md) for details.
<h3>14: CW (Morse) text</h3>
Enter the text to be keyed when Morse input is active and in text mode