Spectrum frequency zoom: do not combine mousewheel with Alt. Instead zooming active only outside channels center lines. Added documentation. For issue #773
@ -937,6 +937,16 @@ This shows the spectrum in the passband returned from the sampling device possib
@@ -937,6 +937,16 @@ This shows the spectrum in the passband returned from the sampling device possib
The spectrum display is controlled by the display control (4).
@ -961,6 +971,18 @@ Use mouse right click anywhere in the view to remove the last entered marker. Us
@@ -961,6 +971,18 @@ Use mouse right click anywhere in the view to remove the last entered marker. Us
Any change in the spectrum settings is not reflected in the markers. You have to clear them and make a new measurement if any critical setting of the spectrum is changed.
<h4>Mouse scroll wheel</h4>
When the mouse is over the center line of a channel:
- scrolling will move the channel by +/- 10 Hz at each scroll up/down respectively
- combined with Ctrl it will move the channel by +/- 100 Hz
- combined with Shift it will move the channel by +/- 1 kHz
When the mouse is not over the center line of a channel it will zoom in/out along X (frequency) axis by a 0.5 step at each scroll up/down respectively between 1x (no zoom) and 10x. Note that in order to zoom on the center line of a channel you may move the mouse pointer in the top margin (center line moving is not active there but zooming is).
When zooming is active use Alt + left click to move the center frequency to the clicked point.