@ -40,7 +40,7 @@ This specifies the bandwidth of a LPF that is applied to the input signal to lim
@@ -40,7 +40,7 @@ This specifies the bandwidth of a LPF that is applied to the input signal to lim
<h3>5: Dev - Frequency deviation</h3>
Adjusts the expected frequency deviation in 0.1 kHz steps from 1 to 6 kHz. Typical values are 4.8 kHz, corresponding to a modulation index of 0.5 at 9,600 baud.
Adjusts the expected peak frequency deviation in 0.1 kHz steps from 1 to 6 kHz. Typical values are 4.8 kHz, corresponding to a modulation index of 0.5 at 9,600 baud.
The End-of-train packet specification is defined in:
@ -40,7 +40,7 @@ This specifies the bandwidth of a LPF that is applied to the input signal to lim
@@ -40,7 +40,7 @@ This specifies the bandwidth of a LPF that is applied to the input signal to lim
<h3>5: Frequency deviation</h3>
Adjusts the expected frequency deviation in 0.1 kHz steps from 1 to 6 kHz. Typical value is 3 kHz.
Adjusts the expected peak frequency deviation in 0.1 kHz steps from 1 to 6 kHz. Typical value is ±3 kHz.
m_phaseDiscri.setFMScaling(Real(sampleRate)/m_settings.m_fmDeviation);// m_fmDeviation is full rather than peak deviation, so the usual factor of 2 is cancelled
@ -34,7 +34,7 @@ This specifies the bandwidth of a LPF that is applied to the input signal to lim
@@ -34,7 +34,7 @@ This specifies the bandwidth of a LPF that is applied to the input signal to lim
<h3>6: Frequency deviation</h3>
Adjusts the expected frequency deviation in 0.1 kHz steps from 1 to 6 kHz. Typical values are 2.5 kHz and 5 kHz.
Adjusts the expected peak frequency deviation in 0.1 kHz steps from 1 to 6 kHz. Typical values are ±2.5 kHz and ±5 kHz.
@ -30,7 +30,7 @@ This specifies the bandwidth of a LPF that is applied to the input signal to lim
@@ -30,7 +30,7 @@ This specifies the bandwidth of a LPF that is applied to the input signal to lim
<h3>5: Dev - Frequency deviation</h3>
Adjusts the expected frequency deviation in 0.1 kHz steps from 1 to 6 kHz. POCSAG uses FSK with a +/- 4.5 kHz shift.
Adjusts the expected peak frequency deviation in 0.1 kHz steps from 1 to 6 kHz. POCSAG uses FSK with a ±4.5 kHz shift.
@ -34,7 +34,7 @@ This specifies the bandwidth of a LPF that is applied to the input signal to lim
@@ -34,7 +34,7 @@ This specifies the bandwidth of a LPF that is applied to the input signal to lim
<h3>5: Dev - Frequency deviation</h3>
Adjusts the expected frequency deviation in 0.1 kHz steps from 1 to 5 kHz. Typical value to RS41 is 2.4kHz.
Adjusts the expected peak frequency deviation in 0.1 kHz steps from 1 to 5 kHz. Typical value to RS41 is ±2.4kHz.
@ -34,7 +34,7 @@ This specifies the bandwidth of a LPF that is applied to the output signal to li
@@ -34,7 +34,7 @@ This specifies the bandwidth of a LPF that is applied to the output signal to li
<h3>6: FM Deviation</h3>
This specifies the maximum frequency deviation. Typically this should be 4.8kHz, giving a modulation index of 0.5 at 9,600 baud.
This specifies the peak frequency deviation. Typically this should be ±4.8kHz, giving a modulation index of 0.5 at 9,600 baud.
@ -32,7 +32,7 @@ This specifies the bandwidth of a LPF that is applied to the output signal to li
@@ -32,7 +32,7 @@ This specifies the bandwidth of a LPF that is applied to the output signal to li
<h3>6: Frequency deviation</h3>
Adjusts the frequency deviation in 0.1 kHz steps from 1 to 6 kHz. Typical values are 2.5 kHz and 5 kHz.
Adjusts the frequency peak deviation in 0.1 kHz steps from 1 to 6 kHz. Typical values are ±2.5 kHz and ±5 kHz.
@ -32,7 +32,7 @@ This is the bandwidth in kHz of the modulating signal filtered before modulation
@@ -32,7 +32,7 @@ This is the bandwidth in kHz of the modulating signal filtered before modulation
<h3>7: Frequency deviation</h3>
Adjusts the frequency deviation in 1 kHz steps from 0 to 100 kHz
Adjusts the peak frequency deviation in 1 kHz steps from 0 to 100 kHz