ChirpModemModSettings: description: ChirpModem modulator settings (libchirpmodem transmitter, format v1) type: object properties: inputFrequencyOffset: type: integer format: int64 spreadFactor: type: integer format: int32 description: Spreading factor default: 9 minimum: 7 maximum: 12 bandwidth: type: integer format: int32 description: Chip rate, equal to the occupied bandwidth, in Hz. 62500 and 125000 are in use default: 62500 minimum: 1000 maximum: 2000000 mode: type: integer format: int32 description: "Payload mode: -1 auto (non-coherent at SF >= 10 or BW <= 62.5 kHz), 0 non-coherent, 1 coherent" default: -1 enum: [-1, 0, 1] profile: type: integer format: int32 description: "0 licensed (amateur: source callsign required, no encryption), 1 unlicensed (ISM)" default: 0 enum: [0, 1] source: type: string description: Source callsign (A-Z 0-9 - / ., at most 9 characters). Required by the licensed profile destination: type: string description: Destination callsign, empty for none message: type: string description: Body, sent as UTF-8 repeat: type: integer format: int32 description: Frames per transmission default: 1 minimum: 1 maximum: 1000 gap: type: number format: float description: Silence between frames and before the CW ID, in seconds default: 0.5 minimum: 0 maximum: 60 amplitude: type: number format: float description: Peak amplitude, 0 to 1 of full scale default: 0.7 minimum: 0 maximum: 1 cwId: type: integer format: int32 description: Send "DE " in Morse after each transmission (47 CFR 97.119). Turning it off in the licensed profile is reported as a warning default: 1 enum: [0, 1] cwWpm: type: integer format: int32 description: CW ID speed in words per minute, at most 20 (47 CFR 97.119(b)(1)) default: 20 minimum: 5 maximum: 20 rgbColor: type: integer format: int32 title: type: string streamIndex: type: integer format: int32 description: MIMO channel. Not relevant when connected to SO (single Tx). useReverseAPI: type: integer format: int32 description: Synchronize with reverse API (1 for yes, 0 for no) reverseAPIAddress: type: string reverseAPIPort: type: integer format: int32 reverseAPIDeviceIndex: type: integer format: int32 reverseAPIChannelIndex: type: integer format: int32 channelMarker: $ref: "/doc/swagger/include/ChannelMarker.yaml#/ChannelMarker" rollupState: $ref: "/doc/swagger/include/RollupState.yaml#/RollupState" ChirpModemModReport: description: ChirpModem modulator report type: object properties: channelPowerDb: type: number format: double description: Power of the samples being sent, in dB channelSampleRate: type: integer format: int32 description: Rate the frames are generated at, Hz ifOffset: type: integer format: int32 description: Signal centre within the channel before interpolation, Hz transmitting: type: integer format: int32 description: 1 while a transmission is being sent queueLength: type: integer format: int32 description: Transmissions waiting framesSent: type: integer format: int64 description: Frames sent since the channel started transmissions: type: integer format: int64 description: Transmissions completed since the channel started, each with its CW ID airtime: type: number format: float description: Seconds of transmissions sent since the channel started lastDuration: type: number format: float description: Length of the last transmission queued, in seconds frameSeconds: type: number format: float description: Time on air of one frame with the current settings and message, in seconds maxBody: type: integer format: int32 description: Longest body that fits one frame with the current callsigns, in bytes lastEvent: type: string description: queued, started, sent, aborted or error lastError: type: string description: Why the last request was refused or cut off, empty otherwise warning: type: string description: A configuration that is allowed but needs attention, such as no CW ID in the licensed profile ChirpModemModActions: description: ChirpModem modulator actions type: object properties: tx: type: integer format: int32 description: "1: transmit. Without src, dst or message, the settings' values are used" enum: [0, 1] src: type: string description: Source callsign for this transmission only dst: type: string description: Destination callsign for this transmission only message: type: string description: Body for this transmission only, sent as UTF-8