You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1244 lines
47 KiB
1244 lines
47 KiB
/////////////////////////////////////////////////////////////////////////////////// |
|
// Copyright (C) 2018-2020, 2022 Edouard Griffiths, F4EXB <f4exb06@gmail.com> // |
|
// // |
|
// This program is free software; you can redistribute it and/or modify // |
|
// it under the terms of the GNU General Public License as published by // |
|
// the Free Software Foundation as version 3 of the License, or // |
|
// (at your option) any later version. // |
|
// // |
|
// This program is distributed in the hope that it will be useful, // |
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of // |
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // |
|
// GNU General Public License V3 for more details. // |
|
// // |
|
// You should have received a copy of the GNU General Public License // |
|
// along with this program. If not, see <http://www.gnu.org/licenses/>. // |
|
/////////////////////////////////////////////////////////////////////////////////// |
|
|
|
|
|
#include <string.h> |
|
#include <errno.h> |
|
|
|
#include <QDebug> |
|
#include <QMutexLocker> |
|
#include <QNetworkReply> |
|
#include <QBuffer> |
|
|
|
#include "SWGDeviceState.h" |
|
#include "SWGDeviceSettings.h" |
|
#include "SWGDeviceReport.h" |
|
#include "SWGBladeRF2OutputReport.h" |
|
|
|
#include "dsp/dspcommands.h" |
|
#include "device/deviceapi.h" |
|
#include "bladerf2/devicebladerf2shared.h" |
|
#include "bladerf2/devicebladerf2.h" |
|
|
|
#include "bladerf2outputthread.h" |
|
#include "bladerf2output.h" |
|
|
|
MESSAGE_CLASS_DEFINITION(BladeRF2Output::MsgConfigureBladeRF2, Message) |
|
MESSAGE_CLASS_DEFINITION(BladeRF2Output::MsgStartStop, Message) |
|
MESSAGE_CLASS_DEFINITION(BladeRF2Output::MsgReportGainRange, Message) |
|
|
|
BladeRF2Output::BladeRF2Output(DeviceAPI *deviceAPI) : |
|
m_deviceAPI(deviceAPI), |
|
m_settings(), |
|
m_dev(nullptr), |
|
m_thread(nullptr), |
|
m_deviceDescription("BladeRF2Output"), |
|
m_running(false) |
|
{ |
|
openDevice(); |
|
m_deviceAPI->setNbSinkStreams(1); |
|
m_networkManager = new QNetworkAccessManager(); |
|
QObject::connect( |
|
m_networkManager, |
|
&QNetworkAccessManager::finished, |
|
this, |
|
&BladeRF2Output::networkManagerFinished |
|
); |
|
} |
|
|
|
BladeRF2Output::~BladeRF2Output() |
|
{ |
|
QObject::disconnect( |
|
m_networkManager, |
|
&QNetworkAccessManager::finished, |
|
this, |
|
&BladeRF2Output::networkManagerFinished |
|
); |
|
delete m_networkManager; |
|
|
|
if (m_running) { |
|
stop(); |
|
} |
|
|
|
closeDevice(); |
|
} |
|
|
|
void BladeRF2Output::destroy() |
|
{ |
|
delete this; |
|
} |
|
|
|
bool BladeRF2Output::openDevice() |
|
{ |
|
m_sampleSourceFifo.resize(SampleSourceFifo::getSizePolicy(m_settings.m_devSampleRate)); |
|
|
|
// look for Tx buddies and get reference to the device object |
|
if (m_deviceAPI->getSinkBuddies().size() > 0) // look sink sibling first |
|
{ |
|
qDebug("BladeRF2Output::openDevice: look in Tx buddies"); |
|
|
|
DeviceAPI *sinkBuddy = m_deviceAPI->getSinkBuddies()[0]; |
|
DeviceBladeRF2Shared *deviceBladeRF2Shared = (DeviceBladeRF2Shared*) sinkBuddy->getBuddySharedPtr(); |
|
|
|
if (deviceBladeRF2Shared == 0) |
|
{ |
|
qCritical("BladeRF2Output::openDevice: the sink buddy shared pointer is null"); |
|
return false; |
|
} |
|
|
|
DeviceBladeRF2 *device = deviceBladeRF2Shared->m_dev; |
|
|
|
if (device == 0) |
|
{ |
|
qCritical("BladeRF2Output::openDevice: cannot get device pointer from Tx buddy"); |
|
return false; |
|
} |
|
|
|
m_deviceShared.m_dev = device; |
|
} |
|
// look for Rx buddies and get reference to the device object |
|
else if (m_deviceAPI->getSourceBuddies().size() > 0) // then source |
|
{ |
|
qDebug("BladeRF2Output::openDevice: look in Rx buddies"); |
|
|
|
DeviceAPI *sourceBuddy = m_deviceAPI->getSourceBuddies()[0]; |
|
DeviceBladeRF2Shared *deviceBladeRF2Shared = (DeviceBladeRF2Shared*) sourceBuddy->getBuddySharedPtr(); |
|
|
|
if (deviceBladeRF2Shared == 0) |
|
{ |
|
qCritical("BladeRF2Output::openDevice: the source buddy shared pointer is null"); |
|
return false; |
|
} |
|
|
|
DeviceBladeRF2 *device = deviceBladeRF2Shared->m_dev; |
|
|
|
if (device == 0) |
|
{ |
|
qCritical("BladeRF2Output::openDevice: cannot get device pointer from Rx buddy"); |
|
return false; |
|
} |
|
|
|
m_deviceShared.m_dev = device; |
|
} |
|
// There are no buddies then create the first BladeRF2 device |
|
else |
|
{ |
|
qDebug("BladeRF2Output::openDevice: open device here"); |
|
|
|
m_deviceShared.m_dev = new DeviceBladeRF2(); |
|
char serial[256]; |
|
strcpy(serial, qPrintable(m_deviceAPI->getSamplingDeviceSerial())); |
|
|
|
if (!m_deviceShared.m_dev->open(serial)) |
|
{ |
|
qCritical("BladeRF2Output::openDevice: cannot open BladeRF2 device"); |
|
return false; |
|
} |
|
} |
|
|
|
m_deviceShared.m_channel = m_deviceAPI->getDeviceItemIndex(); // publicly allocate channel |
|
m_deviceShared.m_sink = this; |
|
m_deviceAPI->setBuddySharedPtr(&m_deviceShared); // propagate common parameters to API |
|
return true; |
|
} |
|
|
|
void BladeRF2Output::closeDevice() |
|
{ |
|
if (m_deviceShared.m_dev == 0) { // was never open |
|
return; |
|
} |
|
|
|
if (m_running) { |
|
stop(); |
|
} |
|
|
|
if (m_thread) { // stills own the thread => transfer to a buddy |
|
moveThreadToBuddy(); |
|
} |
|
|
|
m_deviceShared.m_channel = -1; // publicly release channel |
|
m_deviceShared.m_sink = 0; |
|
|
|
// No buddies so effectively close the device |
|
|
|
if ((m_deviceAPI->getSinkBuddies().size() == 0) && (m_deviceAPI->getSourceBuddies().size() == 0)) |
|
{ |
|
m_deviceShared.m_dev->close(); |
|
delete m_deviceShared.m_dev; |
|
m_deviceShared.m_dev = 0; |
|
} |
|
} |
|
|
|
void BladeRF2Output::init() |
|
{ |
|
applySettings(m_settings, QList<QString>(), true); |
|
} |
|
|
|
BladeRF2OutputThread *BladeRF2Output::findThread() |
|
{ |
|
if (m_thread == 0) // this does not own the thread |
|
{ |
|
BladeRF2OutputThread *bladeRF2OutputThread = 0; |
|
|
|
// find a buddy that has allocated the thread |
|
const std::vector<DeviceAPI*>& sinkBuddies = m_deviceAPI->getSinkBuddies(); |
|
std::vector<DeviceAPI*>::const_iterator it = sinkBuddies.begin(); |
|
|
|
for (; it != sinkBuddies.end(); ++it) |
|
{ |
|
BladeRF2Output *buddySink = ((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_sink; |
|
|
|
if (buddySink) |
|
{ |
|
bladeRF2OutputThread = buddySink->getThread(); |
|
|
|
if (bladeRF2OutputThread) { |
|
break; |
|
} |
|
} |
|
} |
|
|
|
return bladeRF2OutputThread; |
|
} |
|
else |
|
{ |
|
return m_thread; // own thread |
|
} |
|
} |
|
|
|
void BladeRF2Output::moveThreadToBuddy() |
|
{ |
|
const std::vector<DeviceAPI*>& sinkBuddies = m_deviceAPI->getSinkBuddies(); |
|
std::vector<DeviceAPI*>::const_iterator it = sinkBuddies.begin(); |
|
|
|
for (; it != sinkBuddies.end(); ++it) |
|
{ |
|
BladeRF2Output *buddySink = ((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_sink; |
|
|
|
if (buddySink) |
|
{ |
|
buddySink->setThread(m_thread); |
|
m_thread = 0; // zero for others |
|
} |
|
} |
|
} |
|
|
|
bool BladeRF2Output::start() |
|
{ |
|
// Buddy lists can be changed in the GUI thread, but are accessed here (and in functions called from here) |
|
// in the device engine thread. Lock before any of our own mutexes, to keep a consistent lock order. |
|
QMutexLocker buddiesLocker(&DeviceAPI::getBuddiesMutex()); |
|
|
|
// There is a single thread per physical device (Tx side). This thread is unique and referenced by a unique |
|
// buddy in the group of sink buddies associated with this physical device. |
|
// |
|
// This start method is responsible for managing the thread and channel enabling when the streaming of a Tx channel is started |
|
// |
|
// It checks the following conditions |
|
// - the thread is allocated or not (by itself or one of its buddies). If it is it grabs the thread pointer. |
|
// - the requested channel is the first (0) or the following (just 1 in BladeRF 2 case) |
|
// |
|
// The BladeRF support library lets you work in two possible modes: |
|
// - Single Output (SO) with only one channel streaming. This HAS to be channel 0. |
|
// - Multiple Output (MO) with two channels streaming using interleaved samples. It MUST be in this configuration if channel 1 |
|
// is used. When we will run with only channel 1 streaming from the client perspective the channel 0 will actually be enabled |
|
// and streaming but zero samples will be sent to it. |
|
// |
|
// It manages the transition form SO where only one channel (the first or channel 0) should be running to the |
|
// Multiple Output (MO) if the requested channel is 1. More generally it checks if the requested channel is within the current |
|
// channel range allocated in the thread or past it. To perform the transition it stops the thread, deletes it and creates a new one. |
|
// It marks the thread as needing start. |
|
// |
|
// If the requested channel is within the thread channel range (this thread being already allocated) it simply removes its FIFO reference |
|
// so that the samples are not taken from the FIFO anymore and leaves the thread unchanged (no stop, no delete/new) |
|
// |
|
// If there is no thread allocated it creates a new one with a number of channels that fits the requested channel. That is |
|
// 1 if channel 0 is requested (SO mode) and 2 if channel 1 is requested (MO mode). It marks the thread as needing start. |
|
// |
|
// Eventually it registers the FIFO in the thread. If the thread has to be started it enables the channels up to the number of channels |
|
// allocated in the thread and starts the thread. |
|
|
|
if (!m_deviceShared.m_dev) |
|
{ |
|
qDebug("BladeRF2Output::start: no device object"); |
|
return false; |
|
} |
|
|
|
int requestedChannel = m_deviceAPI->getDeviceItemIndex(); |
|
BladeRF2OutputThread *bladeRF2OutputThread = findThread(); |
|
bool needsStart = false; |
|
|
|
if (bladeRF2OutputThread) // if thread is already allocated |
|
{ |
|
qDebug("BladeRF2Output::start: thread is already allocated"); |
|
|
|
int nbOriginalChannels = bladeRF2OutputThread->getNbChannels(); |
|
|
|
if (requestedChannel+1 > nbOriginalChannels) // expansion by deleting and re-creating the thread |
|
{ |
|
qDebug("BladeRF2Output::start: expand channels. Re-allocate thread and take ownership"); |
|
|
|
SampleSourceFifo **fifos = new SampleSourceFifo*[nbOriginalChannels]; |
|
unsigned int *log2Interps = new unsigned int[nbOriginalChannels]; |
|
|
|
for (int i = 0; i < nbOriginalChannels; i++) // save original FIFO references and data |
|
{ |
|
fifos[i] = bladeRF2OutputThread->getFifo(i); |
|
log2Interps[i] = bladeRF2OutputThread->getLog2Interpolation(i); |
|
} |
|
|
|
bladeRF2OutputThread->stopWork(); |
|
delete bladeRF2OutputThread; |
|
bladeRF2OutputThread = new BladeRF2OutputThread(m_deviceShared.m_dev->getDev(), requestedChannel+1); |
|
m_thread = bladeRF2OutputThread; // take ownership |
|
|
|
for (int i = 0; i < nbOriginalChannels; i++) // restore original FIFO references |
|
{ |
|
bladeRF2OutputThread->setFifo(i, fifos[i]); |
|
bladeRF2OutputThread->setLog2Interpolation(i, log2Interps[i]); |
|
} |
|
|
|
// remove old thread address from buddies (reset in all buddies) |
|
const std::vector<DeviceAPI*>& sinkBuddies = m_deviceAPI->getSinkBuddies(); |
|
std::vector<DeviceAPI*>::const_iterator it = sinkBuddies.begin(); |
|
|
|
for (; it != sinkBuddies.end(); ++it) { |
|
((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_sink->setThread(0); |
|
} |
|
|
|
// close all channels |
|
for (int i = bladeRF2OutputThread->getNbChannels()-1; i >= 0; i--) { |
|
m_deviceShared.m_dev->closeTx(i); |
|
} |
|
|
|
// was used as temporary storage: |
|
delete[] fifos; |
|
delete[] log2Interps; |
|
|
|
needsStart = true; |
|
} |
|
else |
|
{ |
|
qDebug("BladeRF2Output::start: keep buddy thread"); |
|
} |
|
} |
|
else // first allocation |
|
{ |
|
qDebug("BladeRF2Output::start: allocate thread and take ownership"); |
|
bladeRF2OutputThread = new BladeRF2OutputThread(m_deviceShared.m_dev->getDev(), requestedChannel+1); |
|
m_thread = bladeRF2OutputThread; // take ownership |
|
needsStart = true; |
|
} |
|
|
|
bladeRF2OutputThread->setFifo(requestedChannel, &m_sampleSourceFifo); |
|
bladeRF2OutputThread->setLog2Interpolation(requestedChannel, m_settings.m_log2Interp); |
|
|
|
applySettings(m_settings, QList<QString>(), true); // re-apply forcibly to set sample rate with the new number of channels |
|
|
|
if (needsStart) |
|
{ |
|
qDebug("BladeRF2Output::start: enabling channel(s) and (re)starting the thread"); |
|
|
|
for (unsigned int i = 0; i < bladeRF2OutputThread->getNbChannels(); i++) // open all channels |
|
{ |
|
if (!m_deviceShared.m_dev->openTx(i)) { |
|
qCritical("BladeRF2Output::start: channel %u cannot be enabled", i); |
|
} |
|
} |
|
|
|
bladeRF2OutputThread->startWork(); |
|
} |
|
|
|
qDebug("BladeRF2Output::start: started"); |
|
m_running = true; |
|
|
|
return true; |
|
} |
|
|
|
void BladeRF2Output::stop() |
|
{ |
|
// Buddy lists can be changed in the GUI thread, but are accessed here (and in functions called from here) |
|
// in the device engine thread. Lock before any of our own mutexes, to keep a consistent lock order. |
|
QMutexLocker buddiesLocker(&DeviceAPI::getBuddiesMutex()); |
|
|
|
// This stop method is responsible for managing the thread and channel disabling when the streaming of |
|
// a Tx channel is stopped |
|
// |
|
// If the thread is currently managing only one channel (SO mode). The thread can be just stopped and deleted. |
|
// Then the channel is closed (disabled). |
|
// |
|
// If the thread is currently managing many channels (MO mode) and we are removing the last channel. The transition |
|
// from MO to SO or reduction of MO size is handled by stopping the thread, deleting it and creating a new one |
|
// with one channel less if (and only if) there is still a channel active. |
|
// |
|
// If the thread is currently managing many channels (MO mode) but the channel being stopped is not the last |
|
// channel then the FIFO reference is simply removed from the thread so that this FIFO will not be used anymore. |
|
// In this case the channel is not closed (disabled) so that other channels can continue with the |
|
// same configuration. The device continues streaming on this channel but the samples are set to all zeros. |
|
|
|
if (!m_running) { |
|
return; |
|
} |
|
|
|
int requestedChannel = m_deviceAPI->getDeviceItemIndex(); |
|
BladeRF2OutputThread *bladeRF2OutputThread = findThread(); |
|
|
|
if (bladeRF2OutputThread == 0) { // no thread allocated |
|
return; |
|
} |
|
|
|
int nbOriginalChannels = bladeRF2OutputThread->getNbChannels(); |
|
|
|
if (nbOriginalChannels == 1) // SO mode => just stop and delete the thread |
|
{ |
|
qDebug("BladeRF2Output::stop: SO mode. Just stop and delete the thread"); |
|
bladeRF2OutputThread->stopWork(); |
|
delete bladeRF2OutputThread; |
|
m_thread = nullptr; |
|
|
|
// remove old thread address from buddies (reset in all buddies) |
|
const std::vector<DeviceAPI*>& sinkBuddies = m_deviceAPI->getSinkBuddies(); |
|
std::vector<DeviceAPI*>::const_iterator it = sinkBuddies.begin(); |
|
|
|
for (; it != sinkBuddies.end(); ++it) { |
|
((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_sink->setThread(nullptr); |
|
} |
|
|
|
m_deviceShared.m_dev->closeTx(0); // close the unique channel |
|
} |
|
else if (requestedChannel == nbOriginalChannels - 1) // remove last MO channel => reduce by deleting and re-creating the thread |
|
{ |
|
qDebug("BladeRF2Output::stop: MO mode. Reduce by deleting and re-creating the thread"); |
|
bladeRF2OutputThread->stopWork(); |
|
SampleSourceFifo **fifos = new SampleSourceFifo*[nbOriginalChannels-1]; |
|
unsigned int *log2Interps = new unsigned int[nbOriginalChannels-1]; |
|
bool stillActiveFIFO = false; |
|
|
|
for (int i = 0; i < nbOriginalChannels-1; i++) // save original FIFO references |
|
{ |
|
fifos[i] = bladeRF2OutputThread->getFifo(i); |
|
stillActiveFIFO = stillActiveFIFO || (bladeRF2OutputThread->getFifo(i) != nullptr); |
|
log2Interps[i] = bladeRF2OutputThread->getLog2Interpolation(i); |
|
} |
|
|
|
delete bladeRF2OutputThread; |
|
m_thread = 0; |
|
|
|
if (stillActiveFIFO) |
|
{ |
|
bladeRF2OutputThread = new BladeRF2OutputThread(m_deviceShared.m_dev->getDev(), nbOriginalChannels-1); |
|
m_thread = bladeRF2OutputThread; // take ownership |
|
|
|
for (int i = 0; i < nbOriginalChannels-1; i++) // restore original FIFO references |
|
{ |
|
bladeRF2OutputThread->setFifo(i, fifos[i]); |
|
bladeRF2OutputThread->setLog2Interpolation(i, log2Interps[i]); |
|
} |
|
} |
|
else |
|
{ |
|
qDebug("BladeRF2Output::stop: do not re-create thread as there are no more FIFOs active"); |
|
} |
|
|
|
// remove old thread address from buddies (reset in all buddies) |
|
const std::vector<DeviceAPI*>& sinkBuddies = m_deviceAPI->getSinkBuddies(); |
|
std::vector<DeviceAPI*>::const_iterator it = sinkBuddies.begin(); |
|
|
|
for (; it != sinkBuddies.end(); ++it) { |
|
((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_sink->setThread(nullptr); |
|
} |
|
|
|
// close all channels |
|
for (int i = nbOriginalChannels-1; i >= 0; i--) { |
|
m_deviceShared.m_dev->closeTx(i); |
|
} |
|
|
|
if (stillActiveFIFO) |
|
{ |
|
qDebug("BladeRF2Output::stop: enabling channel(s) and restarting the thread"); |
|
|
|
for (unsigned int i = 0; i < bladeRF2OutputThread->getNbChannels(); i++) // open all channels |
|
{ |
|
if (!m_deviceShared.m_dev->openTx(i)) { |
|
qCritical("BladeRF2Output::start: channel %u cannot be enabled", i); |
|
} |
|
} |
|
|
|
bladeRF2OutputThread->startWork(); |
|
} |
|
|
|
// was used as temporary storage: |
|
delete[] fifos; |
|
delete[] log2Interps; |
|
} |
|
else // remove channel from existing thread |
|
{ |
|
qDebug("BladeRF2Output::stop: MO mode. Not changing MO configuration. Just remove FIFO reference"); |
|
bladeRF2OutputThread->setFifo(requestedChannel, nullptr); // remove FIFO |
|
} |
|
|
|
m_running = false; |
|
} |
|
|
|
QByteArray BladeRF2Output::serialize() const |
|
{ |
|
return m_settings.serialize(); |
|
} |
|
|
|
bool BladeRF2Output::deserialize(const QByteArray& data) |
|
{ |
|
bool success = true; |
|
|
|
if (!m_settings.deserialize(data)) |
|
{ |
|
m_settings.resetToDefaults(); |
|
success = false; |
|
} |
|
|
|
MsgConfigureBladeRF2* message = MsgConfigureBladeRF2::create(m_settings, QList<QString>(), true); |
|
m_inputMessageQueue.push(message); |
|
|
|
if (m_guiMessageQueue) |
|
{ |
|
MsgConfigureBladeRF2* messageToGUI = MsgConfigureBladeRF2::create(m_settings, QList<QString>(), true); |
|
m_guiMessageQueue->push(messageToGUI); |
|
} |
|
|
|
return success; |
|
} |
|
|
|
const QString& BladeRF2Output::getDeviceDescription() const |
|
{ |
|
return m_deviceDescription; |
|
} |
|
|
|
int BladeRF2Output::getSampleRate() const |
|
{ |
|
int rate = m_settings.m_devSampleRate; |
|
return (rate / (1<<m_settings.m_log2Interp)); |
|
} |
|
|
|
quint64 BladeRF2Output::getCenterFrequency() const |
|
{ |
|
return m_settings.m_centerFrequency; |
|
} |
|
|
|
void BladeRF2Output::setCenterFrequency(qint64 centerFrequency) |
|
{ |
|
BladeRF2OutputSettings settings = m_settings; |
|
settings.m_centerFrequency = centerFrequency; |
|
|
|
MsgConfigureBladeRF2* message = MsgConfigureBladeRF2::create(settings, QList<QString>{"centerFrequency"}, false); |
|
m_inputMessageQueue.push(message); |
|
|
|
if (m_guiMessageQueue) |
|
{ |
|
MsgConfigureBladeRF2* messageToGUI = MsgConfigureBladeRF2::create(settings, QList<QString>{"centerFrequency"}, false); |
|
m_guiMessageQueue->push(messageToGUI); |
|
} |
|
} |
|
|
|
bool BladeRF2Output::setDeviceCenterFrequency(struct bladerf *dev, int requestedChannel, quint64 freq_hz, int loPpmTenths) |
|
{ |
|
qint64 df = ((qint64)freq_hz * loPpmTenths) / 10000000LL; |
|
freq_hz += df; |
|
|
|
int status = bladerf_set_frequency(dev, BLADERF_CHANNEL_TX(requestedChannel), freq_hz); |
|
|
|
if (status < 0) { |
|
qWarning("BladeRF2Output::setDeviceCenterFrequency: bladerf_set_frequency(%lld) failed: %s", |
|
freq_hz, bladerf_strerror(status)); |
|
return false; |
|
} |
|
else |
|
{ |
|
qDebug("BladeRF2Output::setDeviceCenterFrequency: bladerf_set_frequency(%lld)", freq_hz); |
|
return true; |
|
} |
|
} |
|
|
|
void BladeRF2Output::getFrequencyRange(uint64_t& min, uint64_t& max, int& step, float& scale) |
|
{ |
|
if (m_deviceShared.m_dev) { |
|
m_deviceShared.m_dev->getFrequencyRangeTx(min, max, step, scale); |
|
} |
|
} |
|
|
|
void BladeRF2Output::getSampleRateRange(int& min, int& max, int& step, float& scale) |
|
{ |
|
if (m_deviceShared.m_dev) { |
|
m_deviceShared.m_dev->getSampleRateRangeTx(min, max, step, scale); |
|
} |
|
} |
|
|
|
void BladeRF2Output::getBandwidthRange(int& min, int& max, int& step, float& scale) |
|
{ |
|
if (m_deviceShared.m_dev) { |
|
m_deviceShared.m_dev->getBandwidthRangeTx(min, max, step, scale); |
|
} |
|
} |
|
|
|
void BladeRF2Output::getGlobalGainRange(int& min, int& max, int& step, float& scale) |
|
{ |
|
if (m_deviceShared.m_dev) { |
|
m_deviceShared.m_dev->getGlobalGainRangeTx(min, max, step, scale); |
|
} |
|
} |
|
|
|
bool BladeRF2Output::handleMessage(const Message& message) |
|
{ |
|
if (MsgConfigureBladeRF2::match(message)) |
|
{ |
|
MsgConfigureBladeRF2& conf = (MsgConfigureBladeRF2&) message; |
|
qDebug() << "BladeRF2Output::handleMessage: MsgConfigureBladeRF2"; |
|
|
|
if (!applySettings(conf.getSettings(), conf.getSettingsKeys(), conf.getForce())) |
|
{ |
|
qDebug("BladeRF2Output::handleMessage: MsgConfigureBladeRF2 config error"); |
|
} |
|
|
|
return true; |
|
} |
|
else if (DeviceBladeRF2Shared::MsgReportBuddyChange::match(message)) |
|
{ |
|
DeviceBladeRF2Shared::MsgReportBuddyChange& report = (DeviceBladeRF2Shared::MsgReportBuddyChange&) message; |
|
struct bladerf *dev = m_deviceShared.m_dev->getDev(); |
|
BladeRF2OutputSettings settings = m_settings; |
|
int status; |
|
unsigned int tmp_uint; |
|
bool tmp_bool; |
|
|
|
// evaluate changes that may have been introduced by changes in a buddy |
|
|
|
if (dev) // The BladeRF device must have been open to do so |
|
{ |
|
int requestedChannel = m_deviceAPI->getDeviceItemIndex(); |
|
QList<QString> settingsKeys; |
|
|
|
if (report.getRxElseTx()) // Rx buddy change: check for sample rate change only |
|
{ |
|
settings.m_devSampleRate = report.getDevSampleRate(); |
|
settingsKeys.append("devSampleRate"); |
|
// status = bladerf_get_sample_rate(dev, BLADERF_CHANNEL_TX(requestedChannel), &tmp_uint); |
|
// |
|
// if (status < 0) { |
|
// qCritical("BladeRF2Output::handleMessage: MsgReportBuddyChange: bladerf_get_sample_rate error: %s", bladerf_strerror(status)); |
|
// } else { |
|
// settings.m_devSampleRate = tmp_uint; |
|
// } |
|
} |
|
else // Tx buddy change: check for: frequency, gain mode and value, bias tee, sample rate, bandwidth |
|
{ |
|
settings.m_devSampleRate = report.getDevSampleRate(); |
|
settings.m_LOppmTenths = report.getLOppmTenths(); |
|
settings.m_centerFrequency = report.getCenterFrequency(); |
|
settingsKeys.append("devSampleRate"); |
|
settingsKeys.append("LOppmTenths"); |
|
settingsKeys.append("centerFrequency"); |
|
|
|
status = bladerf_get_bandwidth(dev, BLADERF_CHANNEL_TX(requestedChannel), &tmp_uint); |
|
|
|
if (status < 0) { |
|
qCritical("BladeRF2Output::handleMessage: MsgReportBuddyChange: bladerf_get_bandwidth error: %s", bladerf_strerror(status)); |
|
} else { |
|
settings.m_bandwidth = tmp_uint; |
|
settingsKeys.append("bandwidth"); |
|
} |
|
|
|
status = bladerf_get_bias_tee(dev, BLADERF_CHANNEL_TX(requestedChannel), &tmp_bool); |
|
|
|
if (status < 0) { |
|
qCritical("BladeRF2Output::handleMessage: MsgReportBuddyChange: bladerf_get_bias_tee error: %s", bladerf_strerror(status)); |
|
} else { |
|
settings.m_biasTee = tmp_bool; |
|
settingsKeys.append("biasTee"); |
|
} |
|
} |
|
|
|
// change DSP settings if buddy change introduced a change in center frequency or base rate |
|
if (settingsKeys.contains("centerFrequency") || settingsKeys.contains("devSampleRate")) |
|
{ |
|
int sampleRate = settings.m_devSampleRate/(1<<settings.m_log2Interp); |
|
DSPSignalNotification *notif = new DSPSignalNotification(sampleRate, settings.m_centerFrequency); |
|
m_deviceAPI->getDeviceEngineInputMessageQueue()->push(notif); |
|
} |
|
|
|
m_settings.applySettings(settingsKeys, settings); // acknowledge the new settings |
|
|
|
// propagate settings to GUI if any |
|
if (getMessageQueueToGUI()) |
|
{ |
|
MsgConfigureBladeRF2 *reportToGUI = MsgConfigureBladeRF2::create(m_settings, settingsKeys, false); |
|
getMessageQueueToGUI()->push(reportToGUI); |
|
} |
|
} |
|
|
|
return true; |
|
} |
|
else if (MsgStartStop::match(message)) |
|
{ |
|
MsgStartStop& cmd = (MsgStartStop&) message; |
|
qDebug() << "BladeRF2Input::handleMessage: MsgStartStop: " << (cmd.getStartStop() ? "start" : "stop"); |
|
|
|
if (cmd.getStartStop()) |
|
{ |
|
if (m_deviceAPI->initDeviceEngine()) { |
|
m_deviceAPI->startDeviceEngine(); |
|
} |
|
} |
|
else |
|
{ |
|
m_deviceAPI->stopDeviceEngine(); |
|
} |
|
|
|
if (m_settings.m_useReverseAPI) { |
|
webapiReverseSendStartStop(cmd.getStartStop()); |
|
} |
|
|
|
return true; |
|
} |
|
else |
|
{ |
|
return false; |
|
} |
|
} |
|
|
|
bool BladeRF2Output::applySettings(const BladeRF2OutputSettings& settings, const QList<QString>& settingsKeys, bool force) |
|
{ |
|
qDebug() << "BladeRF2Output::applySettings: force:" << force << settings.getDebugString(settingsKeys, force); |
|
bool forwardChangeOwnDSP = false; |
|
bool forwardChangeRxBuddies = false; |
|
bool forwardChangeTxBuddies = false; |
|
|
|
struct bladerf *dev = m_deviceShared.m_dev->getDev(); |
|
int requestedChannel = m_deviceAPI->getDeviceItemIndex(); |
|
qint64 deviceCenterFrequency = settings.m_centerFrequency; |
|
deviceCenterFrequency -= settings.m_transverterMode ? settings.m_transverterDeltaFrequency : 0; |
|
deviceCenterFrequency = deviceCenterFrequency < 0 ? 0 : deviceCenterFrequency; |
|
|
|
// if ((m_settings.m_devSampleRate != settings.m_devSampleRate) || |
|
// (m_settings.m_log2Interp != settings.m_log2Interp) || force) |
|
if (settingsKeys.contains("devSampleRate") || |
|
settingsKeys.contains("log2Interp") || force) |
|
{ |
|
BladeRF2OutputThread *bladeRF2OutputThread = findThread(); |
|
SampleSourceFifo *fifo = nullptr; |
|
|
|
if (bladeRF2OutputThread) |
|
{ |
|
fifo = bladeRF2OutputThread->getFifo(requestedChannel); |
|
bladeRF2OutputThread->setFifo(requestedChannel, 0); |
|
} |
|
|
|
#if defined(_MSC_VER) |
|
unsigned int fifoRate = (unsigned int) settings.m_devSampleRate / (1<<settings.m_log2Interp); |
|
fifoRate = fifoRate < 48000U ? 48000U : fifoRate; |
|
#else |
|
unsigned int fifoRate = std::max( |
|
(unsigned int) settings.m_devSampleRate / (1<<settings.m_log2Interp), |
|
DeviceBladeRF2Shared::m_sampleFifoMinRate); |
|
#endif |
|
m_sampleSourceFifo.resize(SampleSourceFifo::getSizePolicy(fifoRate)); |
|
|
|
if (fifo) { |
|
bladeRF2OutputThread->setFifo(requestedChannel, &m_sampleSourceFifo); |
|
} |
|
} |
|
|
|
if (settingsKeys.contains("devSampleRate") || force) |
|
{ |
|
forwardChangeOwnDSP = true; |
|
forwardChangeRxBuddies = true; |
|
forwardChangeTxBuddies = true; |
|
|
|
if (dev != 0) |
|
{ |
|
unsigned int actualSamplerate; |
|
|
|
int status = bladerf_set_sample_rate(dev, BLADERF_CHANNEL_TX(requestedChannel), |
|
settings.m_devSampleRate, |
|
&actualSamplerate); |
|
|
|
if (status < 0) |
|
{ |
|
qCritical("BladeRF2Output::applySettings: could not set sample rate: %d: %s", |
|
settings.m_devSampleRate, bladerf_strerror(status)); |
|
} |
|
else |
|
{ |
|
qDebug() << "BladeRF2Output::applySettings: bladerf_set_sample_rate: actual sample rate is " << actualSamplerate; |
|
} |
|
} |
|
} |
|
|
|
if (settingsKeys.contains("bandwidth") || force) |
|
{ |
|
forwardChangeTxBuddies = true; |
|
|
|
if (dev != 0) |
|
{ |
|
unsigned int actualBandwidth; |
|
int status = bladerf_set_bandwidth(dev, BLADERF_CHANNEL_TX(requestedChannel), settings.m_bandwidth, &actualBandwidth); |
|
|
|
if(status < 0) |
|
{ |
|
qCritical("BladeRF2Output::applySettings: could not set bandwidth: %d: %s", |
|
settings.m_bandwidth, bladerf_strerror(status)); |
|
} |
|
else |
|
{ |
|
qDebug() << "BladeRF2Output::applySettings: bladerf_set_bandwidth: actual bandwidth is " << actualBandwidth; |
|
} |
|
} |
|
} |
|
|
|
if (settingsKeys.contains("log2Interp") || force) |
|
{ |
|
forwardChangeOwnDSP = true; |
|
BladeRF2OutputThread *outputThread = findThread(); |
|
|
|
if (outputThread != 0) |
|
{ |
|
outputThread->setLog2Interpolation(requestedChannel, settings.m_log2Interp); |
|
qDebug() << "BladeRF2Output::applySettings: set interpolation to " << (1<<settings.m_log2Interp); |
|
} |
|
} |
|
|
|
if (settingsKeys.contains("centerFrequency") |
|
|| settingsKeys.contains("transverterMode") |
|
|| settingsKeys.contains("transverterDeltaFrequency") |
|
|| settingsKeys.contains("LOppmTenths") |
|
|| settingsKeys.contains("devSampleRate") || force) |
|
{ |
|
forwardChangeOwnDSP = true; |
|
forwardChangeTxBuddies = true; |
|
|
|
if (dev != 0) |
|
{ |
|
if (setDeviceCenterFrequency(dev, requestedChannel, deviceCenterFrequency, settings.m_LOppmTenths)) |
|
{ |
|
if (getMessageQueueToGUI()) |
|
{ |
|
int min, max, step; |
|
float scale; |
|
getGlobalGainRange(min, max, step, scale); |
|
MsgReportGainRange *msg = MsgReportGainRange::create(min, max, step, scale); |
|
getMessageQueueToGUI()->push(msg); |
|
} |
|
} |
|
} |
|
} |
|
|
|
if (settingsKeys.contains("biasTee") || force) |
|
{ |
|
forwardChangeTxBuddies = true; |
|
m_deviceShared.m_dev->setBiasTeeTx(settings.m_biasTee); |
|
} |
|
|
|
if (settingsKeys.contains("globalGain") || force) |
|
{ |
|
forwardChangeTxBuddies = true; |
|
|
|
if (dev) |
|
{ |
|
// qDebug("BladeRF2Output::applySettings: channel: %d gain: %d", requestedChannel, settings.m_globalGain); |
|
int status = bladerf_set_gain(dev, BLADERF_CHANNEL_TX(requestedChannel), settings.m_globalGain); |
|
|
|
if (status < 0) { |
|
qWarning("BladeRF2Output::applySettings: bladerf_set_gain(%d) failed: %s", |
|
settings.m_globalGain, bladerf_strerror(status)); |
|
} else { |
|
qDebug("BladeRF2Output::applySettings: bladerf_set_gain(%d)", settings.m_globalGain); |
|
} |
|
} |
|
} |
|
|
|
if (forwardChangeOwnDSP) |
|
{ |
|
int sampleRate = settings.m_devSampleRate/(1<<settings.m_log2Interp); |
|
DSPSignalNotification *notif = new DSPSignalNotification(sampleRate, settings.m_centerFrequency); |
|
m_deviceAPI->getDeviceEngineInputMessageQueue()->push(notif); |
|
} |
|
|
|
if (forwardChangeRxBuddies) |
|
{ |
|
// send to source buddies |
|
const std::vector<DeviceAPI*>& sourceBuddies = m_deviceAPI->getSourceBuddies(); |
|
std::vector<DeviceAPI*>::const_iterator itSource = sourceBuddies.begin(); |
|
|
|
for (; itSource != sourceBuddies.end(); ++itSource) |
|
{ |
|
DeviceBladeRF2Shared::MsgReportBuddyChange *report = DeviceBladeRF2Shared::MsgReportBuddyChange::create( |
|
settings.m_centerFrequency, |
|
settings.m_LOppmTenths, |
|
2, |
|
settings.m_devSampleRate, // need to forward actual rate to the Rx side |
|
false); |
|
(*itSource)->getSamplingDeviceInputMessageQueue()->push(report); |
|
} |
|
} |
|
|
|
if (forwardChangeTxBuddies) |
|
{ |
|
// send to sink buddies |
|
const std::vector<DeviceAPI*>& sinkBuddies = m_deviceAPI->getSinkBuddies(); |
|
std::vector<DeviceAPI*>::const_iterator itSink = sinkBuddies.begin(); |
|
|
|
for (; itSink != sinkBuddies.end(); ++itSink) |
|
{ |
|
DeviceBladeRF2Shared::MsgReportBuddyChange *report = DeviceBladeRF2Shared::MsgReportBuddyChange::create( |
|
settings.m_centerFrequency, |
|
settings.m_LOppmTenths, |
|
2, |
|
settings.m_devSampleRate, |
|
false); |
|
(*itSink)->getSamplingDeviceInputMessageQueue()->push(report); |
|
} |
|
} |
|
|
|
if (settings.m_useReverseAPI) |
|
{ |
|
bool fullUpdate = (settingsKeys.contains("useReverseAPI") && settings.m_useReverseAPI) || |
|
settingsKeys.contains("reverseAPIAddress") || |
|
settingsKeys.contains("reverseAPIPort") || |
|
settingsKeys.contains("reverseAPIDeviceIndex"); |
|
webapiReverseSendSettings(settingsKeys, settings, fullUpdate || force); |
|
} |
|
|
|
if (force) { |
|
m_settings = settings; |
|
} else { |
|
m_settings.applySettings(settingsKeys, settings); |
|
} |
|
|
|
return true; |
|
} |
|
|
|
int BladeRF2Output::getNbChannels() |
|
{ |
|
BladeRF2OutputThread *bladeRF2OutputThread = findThread(); |
|
|
|
if (bladeRF2OutputThread) { |
|
return bladeRF2OutputThread->getNbChannels(); |
|
} else { |
|
return 0; |
|
} |
|
} |
|
|
|
int BladeRF2Output::webapiSettingsGet( |
|
SWGSDRangel::SWGDeviceSettings& response, |
|
QString& errorMessage) |
|
{ |
|
(void) errorMessage; |
|
response.setBladeRf2OutputSettings(new SWGSDRangel::SWGBladeRF2OutputSettings()); |
|
response.getBladeRf2OutputSettings()->init(); |
|
webapiFormatDeviceSettings(response, m_settings); |
|
return 200; |
|
} |
|
|
|
int BladeRF2Output::webapiSettingsPutPatch( |
|
bool force, |
|
const QStringList& deviceSettingsKeys, |
|
SWGSDRangel::SWGDeviceSettings& response, // query + response |
|
QString& errorMessage) |
|
{ |
|
(void) errorMessage; |
|
BladeRF2OutputSettings settings = m_settings; |
|
webapiUpdateDeviceSettings(settings, deviceSettingsKeys, response); |
|
|
|
MsgConfigureBladeRF2 *msg = MsgConfigureBladeRF2::create(settings, deviceSettingsKeys, force); |
|
m_inputMessageQueue.push(msg); |
|
|
|
if (m_guiMessageQueue) // forward to GUI if any |
|
{ |
|
MsgConfigureBladeRF2 *msgToGUI = MsgConfigureBladeRF2::create(settings, deviceSettingsKeys, force); |
|
m_guiMessageQueue->push(msgToGUI); |
|
} |
|
|
|
webapiFormatDeviceSettings(response, settings); |
|
return 200; |
|
} |
|
|
|
void BladeRF2Output::webapiUpdateDeviceSettings( |
|
BladeRF2OutputSettings& settings, |
|
const QStringList& deviceSettingsKeys, |
|
SWGSDRangel::SWGDeviceSettings& response) |
|
{ |
|
if (deviceSettingsKeys.contains("title")) { |
|
settings.m_title = *response.getBladeRf2OutputSettings()->getTitle(); |
|
} |
|
if (deviceSettingsKeys.contains("centerFrequency")) { |
|
settings.m_centerFrequency = response.getBladeRf2OutputSettings()->getCenterFrequency(); |
|
} |
|
if (deviceSettingsKeys.contains("LOppmTenths")) { |
|
settings.m_LOppmTenths = response.getBladeRf2OutputSettings()->getLOppmTenths(); |
|
} |
|
if (deviceSettingsKeys.contains("devSampleRate")) { |
|
settings.m_devSampleRate = response.getBladeRf2OutputSettings()->getDevSampleRate(); |
|
} |
|
if (deviceSettingsKeys.contains("bandwidth")) { |
|
settings.m_bandwidth = response.getBladeRf2OutputSettings()->getBandwidth(); |
|
} |
|
if (deviceSettingsKeys.contains("log2Interp")) { |
|
settings.m_log2Interp = response.getBladeRf2OutputSettings()->getLog2Interp(); |
|
} |
|
if (deviceSettingsKeys.contains("biasTee")) { |
|
settings.m_biasTee = response.getBladeRf2OutputSettings()->getBiasTee() != 0; |
|
} |
|
if (deviceSettingsKeys.contains("globalGain")) { |
|
settings.m_globalGain = response.getBladeRf2OutputSettings()->getGlobalGain(); |
|
} |
|
if (deviceSettingsKeys.contains("transverterDeltaFrequency")) { |
|
settings.m_transverterDeltaFrequency = response.getBladeRf2OutputSettings()->getTransverterDeltaFrequency(); |
|
} |
|
if (deviceSettingsKeys.contains("transverterMode")) { |
|
settings.m_transverterMode = response.getBladeRf2OutputSettings()->getTransverterMode() != 0; |
|
} |
|
if (deviceSettingsKeys.contains("useReverseAPI")) { |
|
settings.m_useReverseAPI = response.getBladeRf2OutputSettings()->getUseReverseApi() != 0; |
|
} |
|
if (deviceSettingsKeys.contains("reverseAPIAddress")) { |
|
settings.m_reverseAPIAddress = *response.getBladeRf2OutputSettings()->getReverseApiAddress(); |
|
} |
|
if (deviceSettingsKeys.contains("reverseAPIPort")) { |
|
settings.m_reverseAPIPort = response.getBladeRf2OutputSettings()->getReverseApiPort(); |
|
} |
|
if (deviceSettingsKeys.contains("reverseAPIDeviceIndex")) { |
|
settings.m_reverseAPIDeviceIndex = response.getBladeRf2OutputSettings()->getReverseApiDeviceIndex(); |
|
} |
|
} |
|
|
|
int BladeRF2Output::webapiReportGet(SWGSDRangel::SWGDeviceReport& response, QString& errorMessage) |
|
{ |
|
(void) errorMessage; |
|
response.setBladeRf2OutputReport(new SWGSDRangel::SWGBladeRF2OutputReport()); |
|
response.getBladeRf2OutputReport()->init(); |
|
webapiFormatDeviceReport(response); |
|
return 200; |
|
} |
|
|
|
void BladeRF2Output::webapiFormatDeviceSettings(SWGSDRangel::SWGDeviceSettings& response, const BladeRF2OutputSettings& settings) |
|
{ |
|
if (response.getBladeRf2OutputSettings()->getTitle()) { |
|
*response.getBladeRf2OutputSettings()->getTitle() = settings.m_title; |
|
} else { |
|
response.getBladeRf2OutputSettings()->setTitle(new QString(settings.m_title)); |
|
} |
|
|
|
response.getBladeRf2OutputSettings()->setCenterFrequency(settings.m_centerFrequency); |
|
response.getBladeRf2OutputSettings()->setLOppmTenths(settings.m_LOppmTenths); |
|
response.getBladeRf2OutputSettings()->setDevSampleRate(settings.m_devSampleRate); |
|
response.getBladeRf2OutputSettings()->setBandwidth(settings.m_bandwidth); |
|
response.getBladeRf2OutputSettings()->setLog2Interp(settings.m_log2Interp); |
|
response.getBladeRf2OutputSettings()->setBiasTee(settings.m_biasTee ? 1 : 0); |
|
response.getBladeRf2OutputSettings()->setGlobalGain(settings.m_globalGain); |
|
response.getBladeRf2OutputSettings()->setTransverterDeltaFrequency(settings.m_transverterDeltaFrequency); |
|
response.getBladeRf2OutputSettings()->setTransverterMode(settings.m_transverterMode ? 1 : 0); |
|
|
|
response.getBladeRf2OutputSettings()->setUseReverseApi(settings.m_useReverseAPI ? 1 : 0); |
|
|
|
if (response.getBladeRf2OutputSettings()->getReverseApiAddress()) { |
|
*response.getBladeRf2OutputSettings()->getReverseApiAddress() = settings.m_reverseAPIAddress; |
|
} else { |
|
response.getBladeRf2OutputSettings()->setReverseApiAddress(new QString(settings.m_reverseAPIAddress)); |
|
} |
|
|
|
response.getBladeRf2OutputSettings()->setReverseApiPort(settings.m_reverseAPIPort); |
|
response.getBladeRf2OutputSettings()->setReverseApiDeviceIndex(settings.m_reverseAPIDeviceIndex); |
|
} |
|
|
|
void BladeRF2Output::webapiFormatDeviceReport(SWGSDRangel::SWGDeviceReport& response) |
|
{ |
|
DeviceBladeRF2 *device = m_deviceShared.m_dev; |
|
|
|
if (device) |
|
{ |
|
int min, max, step; |
|
float scale; |
|
uint64_t f_min, f_max; |
|
|
|
device->getBandwidthRangeTx(min, max, step, scale); |
|
|
|
response.getBladeRf2OutputReport()->setBandwidthRange(new SWGSDRangel::SWGRange); |
|
response.getBladeRf2OutputReport()->getBandwidthRange()->setMin(min); |
|
response.getBladeRf2OutputReport()->getBandwidthRange()->setMax(max); |
|
response.getBladeRf2OutputReport()->getBandwidthRange()->setStep(step); |
|
response.getBladeRf2OutputReport()->getBandwidthRange()->setScale(scale); |
|
|
|
device->getFrequencyRangeTx(f_min, f_max, step, scale); |
|
|
|
response.getBladeRf2OutputReport()->setFrequencyRange(new SWGSDRangel::SWGFrequencyRange); |
|
response.getBladeRf2OutputReport()->getFrequencyRange()->setMin(f_min); |
|
response.getBladeRf2OutputReport()->getFrequencyRange()->setMax(f_max); |
|
response.getBladeRf2OutputReport()->getFrequencyRange()->setStep(step); |
|
response.getBladeRf2OutputReport()->getBandwidthRange()->setScale(scale); |
|
|
|
device->getGlobalGainRangeTx(min, max, step, scale); |
|
|
|
response.getBladeRf2OutputReport()->setGlobalGainRange(new SWGSDRangel::SWGRange); |
|
response.getBladeRf2OutputReport()->getGlobalGainRange()->setMin(min); |
|
response.getBladeRf2OutputReport()->getGlobalGainRange()->setMax(max); |
|
response.getBladeRf2OutputReport()->getGlobalGainRange()->setStep(step); |
|
response.getBladeRf2OutputReport()->getBandwidthRange()->setScale(scale); |
|
|
|
device->getSampleRateRangeTx(min, max, step, scale); |
|
|
|
response.getBladeRf2OutputReport()->setSampleRateRange(new SWGSDRangel::SWGRange); |
|
response.getBladeRf2OutputReport()->getSampleRateRange()->setMin(min); |
|
response.getBladeRf2OutputReport()->getSampleRateRange()->setMax(max); |
|
response.getBladeRf2OutputReport()->getSampleRateRange()->setStep(step); |
|
response.getBladeRf2OutputReport()->getBandwidthRange()->setScale(scale); |
|
} |
|
} |
|
|
|
int BladeRF2Output::webapiRunGet( |
|
SWGSDRangel::SWGDeviceState& response, |
|
QString& errorMessage) |
|
{ |
|
(void) errorMessage; |
|
m_deviceAPI->getDeviceEngineStateStr(*response.getState()); |
|
return 200; |
|
} |
|
|
|
int BladeRF2Output::webapiRun( |
|
bool run, |
|
SWGSDRangel::SWGDeviceState& response, |
|
QString& errorMessage) |
|
{ |
|
(void) errorMessage; |
|
m_deviceAPI->getDeviceEngineStateStr(*response.getState()); |
|
MsgStartStop *message = MsgStartStop::create(run); |
|
m_inputMessageQueue.push(message); |
|
|
|
if (m_guiMessageQueue) // forward to GUI if any |
|
{ |
|
MsgStartStop *msgToGUI = MsgStartStop::create(run); |
|
m_guiMessageQueue->push(msgToGUI); |
|
} |
|
|
|
return 200; |
|
} |
|
|
|
void BladeRF2Output::webapiReverseSendSettings(const QList<QString>& deviceSettingsKeys, const BladeRF2OutputSettings& settings, bool force) |
|
{ |
|
SWGSDRangel::SWGDeviceSettings *swgDeviceSettings = new SWGSDRangel::SWGDeviceSettings(); |
|
swgDeviceSettings->setDirection(1); // single Tx |
|
swgDeviceSettings->setOriginatorIndex(m_deviceAPI->getDeviceSetIndex()); |
|
swgDeviceSettings->setDeviceHwType(new QString("BladeRF2")); |
|
swgDeviceSettings->setBladeRf2OutputSettings(new SWGSDRangel::SWGBladeRF2OutputSettings()); |
|
SWGSDRangel::SWGBladeRF2OutputSettings *swgBladeRF2OutputSettings = swgDeviceSettings->getBladeRf2OutputSettings(); |
|
|
|
// transfer data that has been modified. When force is on transfer all data except reverse API data |
|
|
|
if (deviceSettingsKeys.contains("title") || force) { |
|
swgBladeRF2OutputSettings->setTitle(new QString(settings.m_title)); |
|
} |
|
if (deviceSettingsKeys.contains("centerFrequency") || force) { |
|
swgBladeRF2OutputSettings->setCenterFrequency(settings.m_centerFrequency); |
|
} |
|
if (deviceSettingsKeys.contains("LOppmTenths") || force) { |
|
swgBladeRF2OutputSettings->setLOppmTenths(settings.m_LOppmTenths); |
|
} |
|
if (deviceSettingsKeys.contains("devSampleRate") || force) { |
|
swgBladeRF2OutputSettings->setDevSampleRate(settings.m_devSampleRate); |
|
} |
|
if (deviceSettingsKeys.contains("bandwidth") || force) { |
|
swgBladeRF2OutputSettings->setBandwidth(settings.m_bandwidth); |
|
} |
|
if (deviceSettingsKeys.contains("log2Interp") || force) { |
|
swgBladeRF2OutputSettings->setLog2Interp(settings.m_log2Interp); |
|
} |
|
if (deviceSettingsKeys.contains("biasTee") || force) { |
|
swgBladeRF2OutputSettings->setBiasTee(settings.m_biasTee ? 1 : 0); |
|
} |
|
if (deviceSettingsKeys.contains("globalGain") || force) { |
|
swgBladeRF2OutputSettings->setGlobalGain(settings.m_globalGain); |
|
} |
|
if (deviceSettingsKeys.contains("transverterDeltaFrequency") || force) { |
|
swgBladeRF2OutputSettings->setTransverterDeltaFrequency(settings.m_transverterDeltaFrequency); |
|
} |
|
if (deviceSettingsKeys.contains("transverterMode") || force) { |
|
swgBladeRF2OutputSettings->setTransverterMode(settings.m_transverterMode ? 1 : 0); |
|
} |
|
|
|
QString deviceSettingsURL = QString("http://%1:%2/sdrangel/deviceset/%3/device/settings") |
|
.arg(settings.m_reverseAPIAddress) |
|
.arg(settings.m_reverseAPIPort) |
|
.arg(settings.m_reverseAPIDeviceIndex); |
|
m_networkRequest.setUrl(QUrl(deviceSettingsURL)); |
|
m_networkRequest.setHeader(QNetworkRequest::ContentTypeHeader, "application/json"); |
|
|
|
QBuffer *buffer = new QBuffer(); |
|
buffer->open((QBuffer::ReadWrite)); |
|
buffer->write(swgDeviceSettings->asJson().toUtf8()); |
|
buffer->seek(0); |
|
|
|
// Always use PATCH to avoid passing reverse API settings |
|
QNetworkReply *reply = m_networkManager->sendCustomRequest(m_networkRequest, "PATCH", buffer); |
|
buffer->setParent(reply); |
|
|
|
delete swgDeviceSettings; |
|
} |
|
|
|
void BladeRF2Output::webapiReverseSendStartStop(bool start) |
|
{ |
|
SWGSDRangel::SWGDeviceSettings *swgDeviceSettings = new SWGSDRangel::SWGDeviceSettings(); |
|
swgDeviceSettings->setDirection(1); // single Tx |
|
swgDeviceSettings->setOriginatorIndex(m_deviceAPI->getDeviceSetIndex()); |
|
swgDeviceSettings->setDeviceHwType(new QString("BladeRF2")); |
|
|
|
QString deviceSettingsURL = QString("http://%1:%2/sdrangel/deviceset/%3/device/run") |
|
.arg(m_settings.m_reverseAPIAddress) |
|
.arg(m_settings.m_reverseAPIPort) |
|
.arg(m_settings.m_reverseAPIDeviceIndex); |
|
m_networkRequest.setUrl(QUrl(deviceSettingsURL)); |
|
m_networkRequest.setHeader(QNetworkRequest::ContentTypeHeader, "application/json"); |
|
|
|
QBuffer *buffer = new QBuffer(); |
|
buffer->open((QBuffer::ReadWrite)); |
|
buffer->write(swgDeviceSettings->asJson().toUtf8()); |
|
buffer->seek(0); |
|
QNetworkReply *reply; |
|
|
|
if (start) { |
|
reply = m_networkManager->sendCustomRequest(m_networkRequest, "POST", buffer); |
|
} else { |
|
reply = m_networkManager->sendCustomRequest(m_networkRequest, "DELETE", buffer); |
|
} |
|
|
|
buffer->setParent(reply); |
|
delete swgDeviceSettings; |
|
} |
|
|
|
void BladeRF2Output::networkManagerFinished(QNetworkReply *reply) |
|
{ |
|
QNetworkReply::NetworkError replyError = reply->error(); |
|
|
|
if (replyError) |
|
{ |
|
qWarning() << "BladeRF2Output::networkManagerFinished:" |
|
<< " error(" << (int) replyError |
|
<< "): " << replyError |
|
<< ": " << reply->errorString(); |
|
} |
|
else |
|
{ |
|
QString answer = reply->readAll(); |
|
answer.chop(1); // remove last \n |
|
qDebug("BladeRF2Output::networkManagerFinished: reply:\n%s", answer.toStdString().c_str()); |
|
} |
|
}
|
|
|