Fix multiple issues preventing SoapySDR output from producing RF:
- handleInputMessages() never called in DSP engine thread (Qt signal
lost without event loop) - scheduled properly
- setGain() moved to start() post-activation (pre-activation gain
silently fails on SoapyUHD)
- fullScale threshold corrected for CS16 format detection
- Timed first write pattern matching gr4-lora SoapySink
MCR pinning for SoapyUHD: inject auto_tick_rate=0 in
DeviceSoapySDR device-open path to prevent UHD from re-deriving the
master clock rate on set_tx_rate(), which breaks the decimator chain
and produces no RF. Also reads SDRANGEL_USRP_MASTER_CLOCK_RATE_HZ env
var for optional MCR override.
TX diagnostic counters: SoapySDROutputThread tracks packets,
underflows, errors. Exposed via REST as streamSettingsArgs
key-value pairs.
This folder contains classes and methods that can be used by different plugins that work with a common physical device or via network. Thus this can be one of the following devices:
BladeRF1: one Rx and one Tx full duplex. Plugins are:
bladerf1input
bladerf1output
BladeRF2: 2 Rx and 2 Tx full duplex (BladeRF 2.0 micro). Plugins are:
bladerf2input
bladerf2output
HackRF: one Rx and one Tx half duplex. Plugins are:
hackrfinput
hackrfoutput
LimeSDR: 2 Rx and 2 Tx full duplex (Lime-USB). 1 Rx and 1 Tx full duplex (Lime-Mini). Plugins are
limesdrinput
limesdroutput
PlutoSDR: one Rx and one Tx full duplex. Plugins are
plutosdrinput
plutosdroutput
SoapySDR: Soapy SDR virtual device
soapysdrinput
soapysdroutput
USRP: Up to 2 Rx and 2 Tx full duplex. Plugins are