You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
f4exb 97e9e21fe9 Release v7.27.2 3 months ago
..
CMakeLists.txt Use Qt6.2 compatible qt_add_plugin in CMake 7 months ago
readme.md Updated versions and changelogs 4 years ago
simpleptt.cpp Fixed settings keys 9 months ago
simpleptt.h Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttcommand.cpp Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttcommand.h Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttcommandoutputdialog.cpp Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttcommandoutputdialog.h Remove unused includes and use more direct includes 3 years ago
simplepttcommandoutputdialog.ui Remove resource pointing to non-existing file 2 years ago
simplepttgui.cpp Removed destroy method leftovers and Sonar lint 2 years ago
simplepttgui.h Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttgui.ui Update properties related to fonts 2 years ago
simplepttmessages.cpp Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttmessages.h Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttplugin.cpp Release v7.27.2 3 months ago
simplepttplugin.h Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttreport.cpp Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttreport.h Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttsettings.cpp simpleptt: Initialize rx to tx GPIO enable setting 4 months ago
simplepttsettings.h Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttwebapiadapter.cpp Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttwebapiadapter.h Rewriting of copyright notices for plugins/features. Part of #1893 3 years ago
simplepttworker.cpp Fix SimpltPTT device id; Add "None" Rx/Tx device option 3 years ago
simplepttworker.h Remove unused includes and use more direct includes 3 years ago

readme.md

Simple PTT plugin

Introduction

This plugin controls switchover between a Rx (Device source) and Tx (Device sink). It has no other controls than an adjustable delay from Rx to Tx and back to Rx. Because of its simplicity it can also serve as a model to build other feature plugins.

Interface

PTT feature plugin GUI

1: Start/Stop plugin

This button starts or stops the plugin

2: PTT button

Click to switch from Rx to Tx and again to switch back to Rx. When in Tx mode the button is lit.

3: Status indicator

This LED type display shows the current PTT status:

  • Green: Rx runs
  • Red: Tx runs
  • Grey: None active (transient)

4: Vox control

PTT feature vox control

4.1: Activate vox system

Toggle this switch to activate or de-activate vox control. When activated the audio input level is monitored and appears in (4.5) and if the level exceeds the level set by (4.3) and displayed in (4.4) then the vox button turns green until vox goes off after the hold period (4.6). The vox system controls the PTT only if the vox PTT enable checkbox is checked (4.2). Thus you can set the appropriate level (4.3) before engaging PTT control.

Right click on this button to open the audio input device selection dialog.

4.2: Enable PTT control

Check this box to enable PTT control by the vox system.

4.3: Vox threshold level

Use this button to adjust the vox threshold level in power dB (0 dB = full range)

4.4: Vox threshold display

This is the value set by (4.3) in dB.

4.5: Audio input level

This is the audio input level in dB displayed when the vox system is active (4.1)

4.6: Vox hold period

The vox is held active for this amount of time in milliseconds after the audio input power goes below the threshold level (4.3)

5: Refresh list of devices

Use this button to refresh the list of devices (5) and (6)

6: Select Rx device set

Use this combo to select which Rx device is controlled

7: Select Tx device set

Use this combo to select which Tx device is controlled. If no device label appears you can use the refresh button (5) to re-populate the list. Else it means that there are no Tx devices in the SDRangel instance.

8: Show last command status and log

When a transition script (11) (13) is enabled this will show the log and status of the last execution of such script.

9: Transition delay from Rx to Tx

Value in milliseconds between Rx stop and Tx start

10: Transition delay from Tx to Rx

Value in milliseconds between Tx stop and Rx start

11: Enable Rx to Tx transition script

Enable/disable execution of a transition script (12) when PTT is switched from Rx to Tx.

12: Rx to Tx transition script

Click on the button with a folder icon to open a file dialog where you can locate the script to be executed when transitioning from Rx to Tx. The full path of the script (if any) is shown next to the button. When invoked 4 positional parameters are passed as arguments to the script in this order:

  • Rx device set index (integer)
  • Rx device center frequency (floating point scientific notation)
  • Tx device set index (integer)
  • Tx device center frequency (floating point scientific notation)

13: Enable Tx to Rx transition script

Enable/disable execution of a transition script (14) when PTT is switched from Tx to Rx.

14: Tx to Rx transition script

Click on the button with a folder icon to open a file dialog where you can locate the script to be executed when transitioning from Tx to Rx. The full path of the script (if any) is shown next to the button. When invoked 4 positional parameters are passed as arguments to the script in this order:

  • Rx device set index (integer)
  • Rx device center frequency (floating point scientific notation)
  • Tx device set index (integer)
  • Tx device center frequency (floating point scientific notation)

15: Enable Rx to Tx GPIO activation

If the controlling device (Rx or Tx specified with radio buttons (18) and (22)) has GPIO support it will use the mask (16) and values (16) bits to activate the corresponding GPIO pins of the device.

16: Rx to Tx GPIO mask bits

Specify which bits of the GPIO are activated (0x00 to 0xFF) during Rx to Tx transition. Bit value 0 to ignore the bit or 1 to take it.

17: Rx to Tx GPIO value bits

Specify the value of the GPIO bits that are activated (0x00 to 0xFF) during Rx to Tx transition. Masked bit positions are ignored and can take any value.

18: Set the Rx device as taking GPIO control

You can specify either the Rx or Tx device for GPIO control. Click on this radio button to specify the Rx device.

19: Enable Tx to Rx GPIO activation

If the controlling device (Rx or Tx specified with radio buttons (18) and (22)) has GPIO support it will use the mask (20) and values (21) bits to activate the corresponding GPIO pins of the device.

20: Tx to Rx GPIO mask bits

Specify which bits of the GPIO are activated (0x00 to 0xFF) during Tx to Rx transition. Bit value 0 to ignore the bit or 1 to take it.

21: Tx to Rx GPIO value bits

Specify the value of the GPIO bits that are activated (0x00 to 0xFF) during Tx to Rx transition. Masked bit positions are ignored and can take any value.

22: Set the Tx device as taking GPIO control

You can specify either the Rx or Tx device for GPIO control. Click on this radio button to specify the Tx device.