You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

214 lines
9.4 KiB

///////////////////////////////////////////////////////////////////////////////////
// Copyright (C) 2020, 2022-2023 Jon Beniston, M7RCE <jon@beniston.com> //
// Copyright (C) 2020 Edouard Griffiths, F4EXB <f4exb06@gmail.com> //
// //
// This program is free software; you can redistribute it and/or modify //
// it under the terms of the GNU General Public License as published by //
// the Free Software Foundation as version 3 of the License, or //
// (at your option) any later version. //
// //
// This program is distributed in the hope that it will be useful, //
// but WITHOUT ANY WARRANTY; without even the implied warranty of //
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the //
// GNU General Public License V3 for more details. //
// //
// You should have received a copy of the GNU General Public License //
// along with this program. If not, see <http://www.gnu.org/licenses/>. //
///////////////////////////////////////////////////////////////////////////////////
#include <functional>
#include <utility>
#include <QDebug>
#include "deviceusrpparam.h"
bool DeviceUSRPParams::open(const QString &deviceStr, bool channelNumOnly)
{
qDebug("DeviceUSRPParams::open: %s", qPrintable(deviceStr));
try
{
std::string device_args(qPrintable(deviceStr));
// UHD's default receive buffering for USB devices (B2xx) is only a few ms at high sample rates,
// which isn't enough to absorb OS scheduling latency (particularly on Windows), resulting in overflows.
// So increase it (to ~2MB), unless specified by the user.
if (deviceStr.contains("type=b200") && !deviceStr.contains("num_recv_frames")) {
device_args += ",num_recv_frames=256";
}
// For USB
// The recv_frame_size must be a multiple of 8 bytes and not a multiple of 1024 bytes.
// recv_frame_size max is 16360.
//m_dev = uhd::usrp::multi_usrp::make(device_args + ",recv_frame_size=16392");
m_dev = uhd::usrp::multi_usrp::make(device_args);
// Save information about what the radio supports
m_nbRxChannels = m_dev->get_rx_num_channels();
m_nbTxChannels = m_dev->get_tx_num_channels();
qDebug() << "DeviceUSRPParams::open: m_nbRxChannels: " << m_nbRxChannels << " m_nbTxChannels: " << m_nbTxChannels;
// On B2xx, Rx streams share a transport, so recv() calls for different streams must be serialised
// (See DeviceUSRPRecvLock). Other devices have a transport per stream, so don't need this.
QString mboardName = QString::fromStdString(m_dev->get_mboard_name());
m_recvLock.setEnabled(mboardName.startsWith("B2"));
qDebug() << "DeviceUSRPParams::open: mboard: " << mboardName;
}
catch (const std::exception& e)
{
qDebug() << "DeviceUSRPParams::open: exception: " << e.what();
close();
return false;
}
// Speed up program initialisation, by not getting all properties
// If we could find out number of channels without ::make ing the device
// that would be even better
if (!channelNumOnly)
{
// Not all properties are supported by all devices / daughterboards, so
// query each group separately, so one failure doesn't prevent use of the device
auto tryQuery = [](const char *what, const std::function<void()>& query) {
try
{
query();
}
catch (const std::exception& e)
{
qWarning() << "DeviceUSRPParams::open: failed to get" << what << ":" << e.what();
}
};
tryQuery("frequency and bandwidth ranges", [this]() {
if (m_nbRxChannels > 0)
{
m_lpfRangeRx = m_dev->get_rx_bandwidth_range();
m_loRangeRx = m_dev->get_fe_rx_freq_range();
}
if (m_nbTxChannels > 0)
{
m_lpfRangeTx = m_dev->get_tx_bandwidth_range();
m_loRangeTx = m_dev->get_fe_tx_freq_range();
}
});
tryQuery("sample rate ranges", [this, &deviceStr]() {
// For some devices (B210), rx/tx_rates vary with master_clock_rate
// which can be set automatically by UHD. For other devices,
// master_clock_rate must be set manually (currently as a device arg)
// Note master_clock_rate is rate between FPGA and RFIC
// tx/rx_rate is rate between PC and FPGA
uhd::meta_range_t clockRange = m_dev->get_master_clock_rate_range();
uhd::property_tree::sptr properties = m_dev->get_device()->get_tree();
const std::string autoTickRatePath = "/mboards/0/auto_tick_rate";
// If master_clock_rate was specified in the device args, it is fixed, so don't change it
if ((clockRange.start() == clockRange.stop())
|| !properties->exists(autoTickRatePath)
|| !properties->access<bool>(autoTickRatePath).get())
{
if (m_nbRxChannels > 0) {
m_srRangeRx = m_dev->get_rx_rates();
}
if (m_nbTxChannels > 0) {
m_srRangeTx = m_dev->get_tx_rates();
}
}
else if (deviceStr.contains("product=B210"))
{
// Auto-calculation below can be slow, so use hardcoded values for B210
m_srRangeRx = uhd::meta_range_t(1e5, 61.44e6);
m_srRangeTx = uhd::meta_range_t(1e5, 61.44e6);
}
else
{
// Setting the master clock rate disables automatic selection, so restore it afterwards,
// even if an exception is thrown, otherwise the clock rate would be stuck
struct RestoreAutoTickRate {
uhd::property_tree::sptr m_properties;
std::string m_path;
~RestoreAutoTickRate() {
try {
m_properties->access<bool>(m_path).set(true);
} catch (...) {
}
}
} restoreAutoTickRate{std::move(properties), autoTickRatePath};
// Find max and min sample rate, for max and min master clock rates
m_dev->set_master_clock_rate(clockRange.start());
uhd::meta_range_t rxLow;
uhd::meta_range_t txLow;
if (m_nbRxChannels > 0) {
rxLow = m_dev->get_rx_rates();
}
if (m_nbTxChannels > 0) {
txLow = m_dev->get_tx_rates();
}
m_dev->set_master_clock_rate(clockRange.stop());
uhd::meta_range_t rxHigh;
uhd::meta_range_t txHigh;
if (m_nbRxChannels > 0)
{
rxHigh = m_dev->get_rx_rates();
m_srRangeRx = uhd::meta_range_t(std::min(rxLow.start(), rxHigh.start()), std::max(rxLow.stop(), rxHigh.stop()));
}
if (m_nbTxChannels > 0)
{
txHigh = m_dev->get_tx_rates();
m_srRangeTx = uhd::meta_range_t(std::min(txLow.start(), txHigh.start()), std::max(txLow.stop(), txHigh.stop()));
}
}
});
tryQuery("Rx gains and antennas", [this]() {
if (m_nbRxChannels > 0)
{
m_gainRangeRx = m_dev->get_rx_gain_range();
std::vector<std::string> rxAntennas = m_dev->get_rx_antennas();
m_rxAntennas.reserve(rxAntennas.size());
for(size_t i = 0, l = rxAntennas.size(); i < l; ++i) {
m_rxAntennas << QString::fromStdString(rxAntennas[i]);
}
std::vector<std::string> rxGainNames = m_dev->get_rx_gain_names();
m_rxGainNames.reserve(rxGainNames.size());
for(size_t i = 0, l = rxGainNames.size(); i < l; ++i) {
m_rxGainNames << QString::fromStdString(rxGainNames[i]);
}
}
});
tryQuery("Tx gains and antennas", [this]() {
if (m_nbTxChannels > 0)
{
m_gainRangeTx = m_dev->get_tx_gain_range();
std::vector<std::string> txAntennas = m_dev->get_tx_antennas();
m_txAntennas.reserve(txAntennas.size());
for(size_t i = 0, l = txAntennas.size(); i < l; ++i) {
m_txAntennas << QString::fromStdString(txAntennas[i]);
}
}
});
tryQuery("clock sources", [this]() {
std::vector<std::string> clockSources = m_dev->get_clock_sources(0);
m_clockSources.reserve(clockSources.size());
for(size_t i = 0, l = clockSources.size(); i < l; ++i) {
m_clockSources << QString::fromStdString(clockSources[i]);
}
});
}
return true;
}
void DeviceUSRPParams::close()
{
m_dev = nullptr;
}