You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 

310 lines
8.6 KiB

/**
******************************************************************************
* @file STM32WLxx_LoRa_E5_mini.h
* @author MCD Application Team
* @brief Header for STM32WLxx_LoRa_E5_mini.c
******************************************************************************
* @attention
*
* Copyright (c) 2020(-2021) STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32WLXX_LORA_E5_MINI_H
#define STM32WLXX_LORA_E5_MINI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32wlxx_LoRa_E5_mini_errno.h"
#include "stm32wlxx_LoRa_E5_mini_conf.h"
#if (USE_BSP_COM_FEATURE > 0)
#if (USE_COM_LOG > 0)
#ifndef __GNUC__
#include "stdio.h"
#endif
#endif
#endif
/** @addtogroup BSP
* @{
*/
/** @defgroup STM32WLXX_LoRa_E5_mini STM32WLXX-LoRa_E5_mini
* @{
*/
/** @defgroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL LOW LEVEL
* @{
*/
/** @defgroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL_Exported_Types LOW LEVEL Exported Types
* @{
*/
typedef enum
{
LED1 = 0,
LED_RED = LED1
}Led_TypeDef;
typedef enum
{
BUTTON_SW1 = 0,
}Button_TypeDef;
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
}ButtonMode_TypeDef;
#if (USE_BSP_COM_FEATURE > 0)
typedef enum
{
COM1 = 0U,
COMn
}COM_TypeDef;
typedef enum
{
COM_STOPBITS_1 = UART_STOPBITS_1,
COM_STOPBITS_2 = UART_STOPBITS_2,
}COM_StopBitsTypeDef;
typedef enum
{
COM_PARITY_NONE = UART_PARITY_NONE,
COM_PARITY_EVEN = UART_PARITY_EVEN,
COM_PARITY_ODD = UART_PARITY_ODD,
}COM_ParityTypeDef;
typedef enum
{
COM_HWCONTROL_NONE = UART_HWCONTROL_NONE,
COM_HWCONTROL_RTS = UART_HWCONTROL_RTS,
COM_HWCONTROL_CTS = UART_HWCONTROL_CTS,
COM_HWCONTROL_RTS_CTS = UART_HWCONTROL_RTS_CTS,
}COM_HwFlowCtlTypeDef;
typedef enum
{
COM_WORDLENGTH_7B = UART_WORDLENGTH_7B,
COM_WORDLENGTH_8B = UART_WORDLENGTH_8B,
COM_WORDLENGTH_9B = UART_WORDLENGTH_9B,
}COM_WordLengthTypeDef;
typedef struct
{
uint32_t BaudRate;
COM_WordLengthTypeDef WordLength;
COM_StopBitsTypeDef StopBits;
COM_ParityTypeDef Parity;
COM_HwFlowCtlTypeDef HwFlowCtl;
}COM_InitTypeDef;
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
typedef struct
{
pUART_CallbackTypeDef pMspInitCb;
pUART_CallbackTypeDef pMspDeInitCb;
}BSP_COM_Cb_t;
#endif /* (USE_HAL_UART_REGISTER_CALLBACKS == 1) */
#endif /* (USE_BSP_COM_FEATURE > 0) */
typedef enum
{
ABSENT = 0,
PRESENT = 1,
}Presence_TypeDef;
/**
* @}
*/
/** @defgroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL_Exported_Constants LOW LEVEL Exported Constants
* @{
*/
/**
* @brief STM32WLXX LoRa_E5_mini BSP Driver version number
*/
#define __STM32WLXX_LoRa_E5_mini_BSP_VERSION_MAIN (0x01U) /*!< [31:24] main version */
#define __STM32WLXX_LoRa_E5_mini_BSP_VERSION_SUB1 (0x01U) /*!< [23:16] sub1 version */
#define __STM32WLXX_LoRa_E5_mini_BSP_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
#define __STM32WLXX_LoRa_E5_mini_BSP_VERSION_RC (0x00U) /*!< [7:0] release candidate */
#define __STM32WLXX_LoRa_E5_mini_BSP_VERSION ((__STM32WLXX_LoRa_E5_mini_BSP_VERSION_MAIN << 24)\
|(__STM32WLXX_LoRa_E5_mini_BSP_VERSION_SUB1 << 16)\
|(__STM32WLXX_LoRa_E5_mini_BSP_VERSION_SUB2 << 8 )\
|(__STM32WLXX_LoRa_E5_mini_BSP_VERSION_RC))
/**
* @brief Define for STM32WLXX_LoRa_E5_mini board
*/
#if !defined (USE_STM32WLXX_LoRa_E5_mini)
#define USE_STM32WLXX_LoRa_E5_mini
#endif
/** @defgroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL_LED LOW LEVEL LED Constants
* @{
*/
#define LEDn 1
#define LED1_PIN GPIO_PIN_5
#define LED1_GPIO_PORT GPIOB
#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) __HAL_RCC_GPIOB_CLK_ENABLE() /* All Led on same port */
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) __HAL_RCC_GPIOB_CLK_DISABLE() /* All Led on same port */
/**
* @}
*/
/** @defgroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL_BUTTON LOW LEVEL BUTTON Constants
* @{
*/
#define BUTTONn 1
/**
* @brief Key push-buttons
*/
#define BUTTON_SW1_PIN GPIO_PIN_13
#define BUTTON_SW1_GPIO_PORT GPIOB
#define BUTTON_SW1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define BUTTON_SW1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define BUTTON_SW1_EXTI_LINE EXTI_LINE_13
#define BUTTON_SW1_EXTI_IRQn EXTI15_10_IRQn
#define H_EXTI_GPIO_PIN_13 hpb_exti[BUTTON_SW1]
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do { BUTTON_SW1_GPIO_CLK_ENABLE(); } while(0)
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) do { BUTTON_SW1_GPIO_CLK_DISABLE();} while(0)
/**
* @}
*/
#if (USE_BSP_COM_FEATURE > 0)
/** @defgroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL_COM LOW LEVEL COM Port Constants
* @{
*/
#define COM1_UART LPUART1
#define COM1_CLK_ENABLE() __HAL_RCC_LPUART1_CLK_ENABLE()
#define COM1_CLK_DISABLE() __HAL_RCC_LPUART1_CLK_DISABLE()
#define COM1_TX_PIN GPIO_PIN_2
#define COM1_TX_GPIO_PORT GPIOA
#define COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define COM1_TX_AF GPIO_AF8_LPUART1
#define COM1_RX_PIN GPIO_PIN_3
#define COM1_RX_GPIO_PORT GPIOA
#define COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define COM1_RX_AF GPIO_AF8_LPUART1
#define COM_POLL_TIMEOUT 1000
#define MX_UART_InitTypeDef COM_InitTypeDef
/**
* @}
*/
#endif /* (USE_BSP_COM_FEATURE > 0)*/
/**
* @}
*/
/** @addtogroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL_Exported_Variables
* @{
*/
extern EXTI_HandleTypeDef hpb_exti[];
#if (USE_BSP_COM_FEATURE > 0)
extern UART_HandleTypeDef hcom_uart[];
#endif /* (USE_BSP_COM_FEATURE > 0) */
/**
* @}
*/
/** @defgroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL_Exported_Functions LOW LEVEL Exported Functions
* @{
*/
uint32_t BSP_GetVersion(void);
/** @defgroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL_LED_Functions LOW LEVEL LED Functions
* @{
*/
int32_t BSP_LED_Init(Led_TypeDef Led);
int32_t BSP_LED_DeInit(Led_TypeDef Led);
int32_t BSP_LED_On(Led_TypeDef Led);
int32_t BSP_LED_Off(Led_TypeDef Led);
int32_t BSP_LED_Toggle(Led_TypeDef Led);
int32_t BSP_LED_GetState(Led_TypeDef Led);
/**
* @}
*/
/** @defgroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL_BUTTON_Functions LOW LEVEL BUTTON Functions
* @{
*/
int32_t BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
int32_t BSP_PB_DeInit(Button_TypeDef Button);
int32_t BSP_PB_GetState(Button_TypeDef Button);
void BSP_PB_Callback(Button_TypeDef Button);
void BSP_PB_IRQHandler(Button_TypeDef Button);
/**
* @}
*/
#if (USE_BSP_COM_FEATURE > 0)
/** @defgroup STM32WLXX_LoRa_E5_mini_LOW_LEVEL_COM_Functions LOW LEVEL COM Port Functions
* @{
*/
int32_t BSP_COM_Init(COM_TypeDef COM, COM_InitTypeDef *COM_Init);
int32_t BSP_COM_DeInit(COM_TypeDef COM);
#if (USE_COM_LOG > 0)
int32_t BSP_COM_SelectLogPort (COM_TypeDef COM);
#endif
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
int32_t BSP_COM_RegisterDefaultMspCallbacks(COM_TypeDef COM);
int32_t BSP_COM_RegisterMspCallbacks(COM_TypeDef COM , BSP_COM_Cb_t *Callback);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
HAL_StatusTypeDef MX_LPUART1_Init(UART_HandleTypeDef *huart, MX_UART_InitTypeDef *COM_Init);
/**
* @}
*/
#endif /* (USE_BSP_COM_FEATURE > 0) */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32WLXX_LoRa_E5_mini_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/