You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
614 lines
25 KiB
614 lines
25 KiB
/** |
|
****************************************************************************** |
|
* @file stm32f1xx_ll_usb.h |
|
* @author MCD Application Team |
|
* @brief Header file of USB Low Layer HAL module. |
|
****************************************************************************** |
|
* @attention |
|
* |
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> |
|
* |
|
* Redistribution and use in source and binary forms, with or without modification, |
|
* are permitted provided that the following conditions are met: |
|
* 1. Redistributions of source code must retain the above copyright notice, |
|
* this list of conditions and the following disclaimer. |
|
* 2. Redistributions in binary form must reproduce the above copyright notice, |
|
* this list of conditions and the following disclaimer in the documentation |
|
* and/or other materials provided with the distribution. |
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors |
|
* may be used to endorse or promote products derived from this software |
|
* without specific prior written permission. |
|
* |
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|
* |
|
****************************************************************************** |
|
*/ |
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/ |
|
#ifndef __STM32F1xx_LL_USB_H |
|
#define __STM32F1xx_LL_USB_H |
|
|
|
#ifdef __cplusplus |
|
extern "C" { |
|
#endif |
|
|
|
#if defined(STM32F102x6) || defined(STM32F102xB) || \ |
|
defined(STM32F103x6) || defined(STM32F103xB) || \ |
|
defined(STM32F103xE) || defined(STM32F103xG) || \ |
|
defined(STM32F105xC) || defined(STM32F107xC) |
|
|
|
/* Includes ------------------------------------------------------------------*/ |
|
#include "stm32f1xx_hal_def.h" |
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver |
|
* @{ |
|
*/ |
|
|
|
/** @addtogroup USB_LL |
|
* @{ |
|
*/ |
|
|
|
/* Exported types ------------------------------------------------------------*/ |
|
/** @defgroup USB_LL_Exported_Types USB Low Layer Exported Types |
|
* @{ |
|
*/ |
|
/** |
|
* @brief USB Mode definition |
|
*/ |
|
typedef enum |
|
{ |
|
USB_DEVICE_MODE = 0, |
|
USB_HOST_MODE = 1, |
|
USB_DRD_MODE = 2 |
|
}USB_ModeTypeDef; |
|
|
|
#if defined (USB_OTG_FS) |
|
/** |
|
* @brief URB States definition |
|
*/ |
|
typedef enum { |
|
URB_IDLE = 0, |
|
URB_DONE, |
|
URB_NOTREADY, |
|
URB_NYET, |
|
URB_ERROR, |
|
URB_STALL |
|
}USB_OTG_URBStateTypeDef; |
|
|
|
/** |
|
* @brief Host channel States definition |
|
*/ |
|
typedef enum { |
|
HC_IDLE = 0, |
|
HC_XFRC, |
|
HC_HALTED, |
|
HC_NAK, |
|
HC_NYET, |
|
HC_STALL, |
|
HC_XACTERR, |
|
HC_BBLERR, |
|
HC_DATATGLERR |
|
}USB_OTG_HCStateTypeDef; |
|
|
|
/** |
|
* @brief USB OTG Initialization Structure definition |
|
*/ |
|
typedef struct |
|
{ |
|
uint32_t dev_endpoints; /*!< Device Endpoints number. |
|
This parameter depends on the used USB core. |
|
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
|
|
uint32_t Host_channels; /*!< Host Channels number. |
|
This parameter Depends on the used USB core. |
|
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
|
|
uint32_t speed; /*!< USB Core speed. |
|
This parameter can be any value of @ref USB_Core_Speed_ */ |
|
|
|
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. |
|
This parameter can be any value of @ref USB_EP0_MPS_ */ |
|
|
|
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ |
|
|
|
uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ |
|
|
|
uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ |
|
|
|
uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ |
|
}USB_OTG_CfgTypeDef; |
|
|
|
typedef struct |
|
{ |
|
uint8_t num; /*!< Endpoint number |
|
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
|
|
uint8_t is_in; /*!< Endpoint direction |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
|
|
uint8_t is_stall; /*!< Endpoint stall condition |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
|
|
uint8_t type; /*!< Endpoint type |
|
This parameter can be any value of @ref USB_EP_Type_ */ |
|
|
|
uint8_t data_pid_start; /*!< Initial data PID |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
|
|
uint8_t even_odd_frame; /*!< IFrame parity |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
|
|
uint16_t tx_fifo_num; /*!< Transmission FIFO number |
|
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
|
|
uint32_t maxpacket; /*!< Endpoint Max packet size |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ |
|
|
|
uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ |
|
|
|
uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ |
|
|
|
uint32_t xfer_len; /*!< Current transfer length */ |
|
|
|
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ |
|
}USB_OTG_EPTypeDef; |
|
|
|
typedef struct |
|
{ |
|
uint8_t dev_addr ; /*!< USB device address. |
|
This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ |
|
|
|
uint8_t ch_num; /*!< Host channel number. |
|
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
|
|
uint8_t ep_num; /*!< Endpoint number. |
|
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
|
|
uint8_t ep_is_in; /*!< Endpoint direction |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
|
|
uint8_t speed; /*!< USB Host speed. |
|
This parameter can be any value of @ref USB_Core_Speed_ */ |
|
|
|
uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ |
|
|
|
uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ |
|
|
|
uint8_t ep_type; /*!< Endpoint Type. |
|
This parameter can be any value of @ref USB_EP_Type_ */ |
|
|
|
uint16_t max_packet; /*!< Endpoint Max packet size. |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ |
|
|
|
uint8_t data_pid; /*!< Initial data PID. |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
|
|
uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ |
|
|
|
uint32_t xfer_len; /*!< Current transfer length. */ |
|
|
|
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ |
|
|
|
uint8_t toggle_in; /*!< IN transfer current toggle flag. |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
|
|
uint8_t toggle_out; /*!< OUT transfer current toggle flag |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
|
|
uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ |
|
|
|
uint32_t ErrCnt; /*!< Host channel error count.*/ |
|
|
|
USB_OTG_URBStateTypeDef urb_state; /*!< URB state. |
|
This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ |
|
|
|
USB_OTG_HCStateTypeDef state; /*!< Host Channel state. |
|
This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ |
|
}USB_OTG_HCTypeDef; |
|
#endif /* USB_OTG_FS */ |
|
|
|
#if defined (USB) |
|
/** |
|
* @brief USB Initialization Structure definition |
|
*/ |
|
typedef struct |
|
{ |
|
uint32_t dev_endpoints; /*!< Device Endpoints number. |
|
This parameter depends on the used USB core. |
|
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
|
|
uint32_t speed; /*!< USB Core speed. |
|
This parameter can be any value of @ref USB_Core_Speed */ |
|
|
|
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. |
|
This parameter can be any value of @ref USB_EP0_MPS */ |
|
|
|
uint32_t phy_itface; /*!< Select the used PHY interface. |
|
This parameter can be any value of @ref USB_Core_PHY */ |
|
|
|
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ |
|
|
|
uint32_t low_power_enable; /*!< Enable or disable Low Power mode */ |
|
|
|
uint32_t lpm_enable; /*!< Enable or disable Battery charging. */ |
|
|
|
uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ |
|
} USB_CfgTypeDef; |
|
|
|
typedef struct |
|
{ |
|
uint8_t num; /*!< Endpoint number |
|
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ |
|
|
|
uint8_t is_in; /*!< Endpoint direction |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
|
|
uint8_t is_stall; /*!< Endpoint stall condition |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ |
|
|
|
uint8_t type; /*!< Endpoint type |
|
This parameter can be any value of @ref USB_EP_Type */ |
|
|
|
uint16_t pmaadress; /*!< PMA Address |
|
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
|
|
|
uint16_t pmaaddr0; /*!< PMA Address0 |
|
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
|
|
|
uint16_t pmaaddr1; /*!< PMA Address1 |
|
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ |
|
|
|
uint8_t doublebuffer; /*!< Double buffer enable |
|
This parameter can be 0 or 1 */ |
|
|
|
uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used |
|
only by USB OTG FS peripheral |
|
This parameter is added to ensure compatibility across USB peripherals */ |
|
|
|
uint32_t maxpacket; /*!< Endpoint Max packet size |
|
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ |
|
|
|
uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ |
|
|
|
uint32_t xfer_len; /*!< Current transfer length */ |
|
|
|
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ |
|
|
|
} USB_EPTypeDef; |
|
#endif /* USB */ |
|
/** |
|
* @} |
|
*/ |
|
|
|
/* Exported constants --------------------------------------------------------*/ |
|
/** @defgroup USB_LL_Exported_Constants USB Low Layer Exported Constants |
|
* @{ |
|
*/ |
|
#if defined (USB_OTG_FS) |
|
/** @defgroup USB_LL_Core_Mode USB Low Layer Core Mode |
|
* @{ |
|
*/ |
|
#define USB_OTG_MODE_DEVICE 0 |
|
#define USB_OTG_MODE_HOST 1 |
|
#define USB_OTG_MODE_DRD 2 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed |
|
* @{ |
|
*/ |
|
#define USB_OTG_SPEED_LOW 2 |
|
#define USB_OTG_SPEED_FULL 3 |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY |
|
* @{ |
|
*/ |
|
#define USB_OTG_ULPI_PHY 1 |
|
#define USB_OTG_EMBEDDED_PHY 2 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS |
|
* @{ |
|
*/ |
|
#define USB_OTG_FS_MAX_PACKET_SIZE 64 |
|
#define USB_OTG_MAX_EP0_SIZE 64 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency |
|
* @{ |
|
*/ |
|
#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1) |
|
#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1) |
|
#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval |
|
* @{ |
|
*/ |
|
#define DCFG_FRAME_INTERVAL_80 0 |
|
#define DCFG_FRAME_INTERVAL_85 1 |
|
#define DCFG_FRAME_INTERVAL_90 2 |
|
#define DCFG_FRAME_INTERVAL_95 3 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS |
|
* @{ |
|
*/ |
|
#define DEP0CTL_MPS_64 0 |
|
#define DEP0CTL_MPS_32 1 |
|
#define DEP0CTL_MPS_16 2 |
|
#define DEP0CTL_MPS_8 3 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed |
|
* @{ |
|
*/ |
|
#define EP_SPEED_LOW 0 |
|
#define EP_SPEED_FULL 1 |
|
#define EP_SPEED_HIGH 2 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_EP_Type USB Low Layer EP Type |
|
* @{ |
|
*/ |
|
#define EP_TYPE_CTRL 0 |
|
#define EP_TYPE_ISOC 1 |
|
#define EP_TYPE_BULK 2 |
|
#define EP_TYPE_INTR 3 |
|
#define EP_TYPE_MSK 3 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines |
|
* @{ |
|
*/ |
|
#define STS_GOUT_NAK 1 |
|
#define STS_DATA_UPDT 2 |
|
#define STS_XFER_COMP 3 |
|
#define STS_SETUP_COMP 4 |
|
#define STS_SETUP_UPDT 6 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines |
|
* @{ |
|
*/ |
|
#define HCFG_30_60_MHZ 0 |
|
#define HCFG_48_MHZ 1 |
|
#define HCFG_6_MHZ 2 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines |
|
* @{ |
|
*/ |
|
#define HPRT0_PRTSPD_HIGH_SPEED 0 |
|
#define HPRT0_PRTSPD_FULL_SPEED 1 |
|
#define HPRT0_PRTSPD_LOW_SPEED 2 |
|
/** |
|
* @} |
|
*/ |
|
|
|
#define HCCHAR_CTRL 0 |
|
#define HCCHAR_ISOC 1 |
|
#define HCCHAR_BULK 2 |
|
#define HCCHAR_INTR 3 |
|
|
|
#define HC_PID_DATA0 0 |
|
#define HC_PID_DATA2 1 |
|
#define HC_PID_DATA1 2 |
|
#define HC_PID_SETUP 3 |
|
|
|
#define GRXSTS_PKTSTS_IN 2 |
|
#define GRXSTS_PKTSTS_IN_XFER_COMP 3 |
|
#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5 |
|
#define GRXSTS_PKTSTS_CH_HALTED 7 |
|
|
|
#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE) |
|
#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE) |
|
|
|
#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE)) |
|
#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) |
|
#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) |
|
#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE) |
|
|
|
#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE)) |
|
#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE)) |
|
#endif /* USB_OTG_FS */ |
|
|
|
#if defined (USB) |
|
/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS |
|
* @{ |
|
*/ |
|
#define DEP0CTL_MPS_64 0 |
|
#define DEP0CTL_MPS_32 1 |
|
#define DEP0CTL_MPS_16 2 |
|
#define DEP0CTL_MPS_8 3 |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup USB_LL_EP_Type USB Low Layer EP Type |
|
* @{ |
|
*/ |
|
#define EP_TYPE_CTRL 0 |
|
#define EP_TYPE_ISOC 1 |
|
#define EP_TYPE_BULK 2 |
|
#define EP_TYPE_INTR 3 |
|
#define EP_TYPE_MSK 3 |
|
/** |
|
* @} |
|
*/ |
|
|
|
#define BTABLE_ADDRESS (0x000) |
|
#endif /* USB */ |
|
/** |
|
* @} |
|
*/ |
|
|
|
/* Exported macros -----------------------------------------------------------*/ |
|
/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros |
|
* @{ |
|
*/ |
|
#if defined (USB_OTG_FS) |
|
#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) |
|
#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) |
|
|
|
#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) |
|
#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) |
|
#endif /* USB_OTG_FS */ |
|
/** |
|
* @} |
|
*/ |
|
|
|
/* Exported functions --------------------------------------------------------*/ |
|
/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions |
|
* @{ |
|
*/ |
|
/** @addtogroup USB_LL_Exported_Functions_Group1 Peripheral Control functions |
|
* @{ |
|
*/ |
|
#if defined (USB_OTG_FS) |
|
HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); |
|
HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); |
|
HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_ModeTypeDef mode); |
|
HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed); |
|
HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num ); |
|
HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len); |
|
void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); |
|
HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address); |
|
HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup); |
|
uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); |
|
uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); |
|
uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx); |
|
uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx); |
|
uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); |
|
uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx); |
|
uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); |
|
void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); |
|
|
|
HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); |
|
HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq); |
|
HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state); |
|
uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx); |
|
uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, |
|
uint8_t ch_num, |
|
uint8_t epnum, |
|
uint8_t dev_address, |
|
uint8_t speed, |
|
uint8_t ep_type, |
|
uint16_t mps); |
|
HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc); |
|
uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num); |
|
HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num); |
|
HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); |
|
HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); |
|
#endif /* USB_OTG_FS */ |
|
|
|
#if defined (USB) |
|
HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef Init); |
|
HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef Init); |
|
HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); |
|
HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); |
|
HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx , USB_ModeTypeDef mode); |
|
HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx , uint8_t speed); |
|
HAL_StatusTypeDef USB_FlushRxFifo (USB_TypeDef *USBx); |
|
HAL_StatusTypeDef USB_FlushTxFifo (USB_TypeDef *USBx, uint32_t num ); |
|
HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx , USB_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len); |
|
void * USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len); |
|
HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx , USB_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx , USB_EPTypeDef *ep); |
|
HAL_StatusTypeDef USB_SetDevAddress (USB_TypeDef *USBx, uint8_t address); |
|
HAL_StatusTypeDef USB_DevConnect (USB_TypeDef *USBx); |
|
HAL_StatusTypeDef USB_DevDisconnect (USB_TypeDef *USBx); |
|
HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); |
|
HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup); |
|
uint32_t USB_ReadInterrupts (USB_TypeDef *USBx); |
|
uint32_t USB_ReadDevAllOutEpInterrupt (USB_TypeDef *USBx); |
|
uint32_t USB_ReadDevOutEPInterrupt (USB_TypeDef *USBx , uint8_t epnum); |
|
uint32_t USB_ReadDevAllInEpInterrupt (USB_TypeDef *USBx); |
|
uint32_t USB_ReadDevInEPInterrupt (USB_TypeDef *USBx , uint8_t epnum); |
|
void USB_ClearInterrupts (USB_TypeDef *USBx, uint32_t interrupt); |
|
|
|
HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); |
|
HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); |
|
void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); |
|
void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); |
|
#endif /* USB */ |
|
/** |
|
* @} |
|
*/ |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
#endif /* STM32F102x6 || STM32F102xB || */ |
|
/* STM32F103x6 || STM32F103xB || */ |
|
/* STM32F103xE || STM32F103xG || */ |
|
/* STM32F105xC || STM32F107xC */ |
|
|
|
#ifdef __cplusplus |
|
} |
|
#endif |
|
|
|
|
|
#endif /* __STM32F1xx_LL_USB_H */ |
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|